FP-UBC2 RADIO DESIGN LABS, FP-UBC2 Datasheet - Page 2

• Manufacturer Part Number: FP-UBC2
• Description: RDL UNBALANCED TO BALANCED CONVERTER, POWER REQUIREMENTS: 24 VDC, 50 MA, FREQUENCY RESPONSE: 20 HZ-40 KHZ, THD: .05 %, INPUT CONNECTOR TYPE: RCA FEMALE, OUTPUT CONNECTOR TYPE: XLR MALE
• Manufacturer: RADIO DESIGN LABS

FLAT-PAK
Model FP-UBC2
Unbalanced to Balanced Converter
TYPICAL PERFORMANCE
Amps per FP-UBC2:
Gain:
Input level:
Input impedance:
Input configuration:
Output impedance:
Output configuration:
Frequency Response:
THD+N:
IMD:
Output Level:
Headroom:
Noise:
Crosstalk:
Power Requirement:
Overall Dimensions:
891-2025F
™
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
SERIES
SOURCE
POWER
24 VDC
OR
U.S.A. [phone], [phone]; Fax: [phone]
Radio Design Labs Technical Support Centers
2 identical circuits (stereo or dual mono operation)
-5 dB to +10 dB adjustable (relative to +4 dBu output for –10 dBV input);
(separate controls for each channel)
-20 dBV to -5 dBV (for +4 dBu output)
10 kΩ
Unbalanced
150 Ω balanced, drives 600 Ω or 10 kΩ lines
Balanced or unbalanced
20 Hz to 40 kHz (+/- 0.25 dB)
< 0.05%; typ. 0.01% (1 kHz)
< 0.02%
+4 dBu
> 18 dB (at rated output level of +4 dBu)
< -85 dB referred to +4 dBu (20 Hz to 20 kHz)
Better than -70 dB (20 Hz to 20 kHz); typ <-80 dB (1 kHz)
24 Vdc @ 50 mA, Ground-referenced
Height:
Width:
Length:
INPUT 1
OUTPUT 1
GAIN INPUT 2 GAIN
1.29 in.
3.25 in.
4.07 in.
OUTPUT 2
Unbalanced Audio
Source Feeding
FP-UBC2 Input
Feeding Other Balanced
Balanced Audio Outputs
10.34 cm
3.28 cm
8.26 cm
Audio Equipment
Installation/Operation
Gain ShownSet
for +4 dBu Output
From A -10 dBV
Input
or Available Supply Current
Current Not to Exceed 2 A
Flat-Pak Modules, Total
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
Power to Additional