H3CR-F8N-300 AC100-240 Omron, H3CR-F8N-300 AC100-240 Datasheet - Page 3

• Manufacturer Part Number: H3CR-F8N-300 AC100-240
• Description: TIMER REPEAT CYCLE
• Manufacturer: Omron

Specifications of H3CR-F8N-300 AC100-240

• Rohs Compliant: YES
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Specifications
■ General
■ Time Ranges
0.05 s to 30 h Models
Note: Instantaneous output is available at any time range. To obtain instantaneous output, set to below 0.
1.2 s to 300 h Models
Note: Instantaneous output is available at any time range. To obtain instantaneous output, set to below 0.
■ Ratings
Note: 1. A power supply with a ripple of 20% max. (single-phase power supply with full-wave rectification) can be used with each DC Model.
Operating mode
Pin type
Operating/Reset method
Output type
Mounting method
Approved standards
Setting
Setting
Rated supply voltage (See notes 1, 2, and 3.) 100 to 240 VAC (50/60 Hz),12 VDC, 24 VAC/DC (50/60 Hz), 48 to 125 VDC
Operating voltage range
Power reset
Power consumption
Control outputs
2. Do not use an inverter output as the power supply. Refer to Safety Precautions for All Timers for details.
3. Refer to Safety Precautions for All Timers when using the Timer together with a 2-wire AC proximity sensor.
Time unit
Time unit
Item
1.2
3
12
30
1.2
3
12
30
0.05 to 1.2
0.3 to 3
1.2 to 12
3 to 30
1.2 to 12
3 to 30
12 to 120
30 to 300
Flicker OFF start
11-pin
Time-limit operation/Time-limit reset or self-reset
Relay output (DPDT)
DIN track mounting, surface mounting, and flush mounting
UL508, CSA C22.2 No.14, NK, Lloyds
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1.
×10 s (10 sec)
s (sec)
H3CR-F
85% to 110% of rated supply voltage; 90% to 110% with 12-VDC models
Minimum power-opening time: 0.1 s
100 to 240 VAC: approx. 10 VA (2.1 W) at 240 VAC
24 VAC/VDC:
48 to 125 VDC: approx. 1.5 W at 125 VDC
12 VDC:
Contact output: 5 A at 250 VAC/30 VDC, resistive load (cosφ = 1)
1.2 to 12
3 to 30
12 to 120
30 to 300
1.2 to 12
3 to 30
12 to 120
30 to 300
8-pin
×10 min (10 min)
×10 s (10 sec)
approx. 2 VA (1.7 W) at 24 VAC
approx. 1 W at 24 VDC
approx. 1 W at 12 VDC
H3CR-F8
0.12 to 1.2
0.3 to 3
1.2 to 12
3 to 30
0.12 to 1.2
0.3 to 3
1.2 to 12
3 to 30
Flicker ON start
11-pin
min (min)
h (hrs)
H3CR-FN
1.2 to 12
3 to 30
12 to 120
30 to 300
8-pin
×10 h (10 hrs)
H3CR-F8N
h (hrs)
H3CR-F
3