H5BR-B-AC24/DC12-24 Omron, H5BR-B-AC24/DC12-24 Datasheet - Page 10

• Manufacturer Part Number: H5BR-B-AC24/DC12-24
• Description: TIMER DIGITAL LCD
• Manufacturer: Omron
• Series: H5BRr

Specifications of H5BR-B-AC24/DC12-24

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H5BRBAC24/DC1224; H5BRBAC24DC1224

Note:
H5BR
Refer to the Setting Item Table below for details on the operation of specific modes.
Mode
Run mode
Setting mode
OPERATIONAL OVERVIEW
SETTING ITEM TABLE
Timing range
1. Changes made in setting mode become effective when run mode is entered.
2. The time range setting appears first when setting mode is entered.
Setting mode
Press the
MODE key
Setting item
Set value
Batch count set
value
Time range
UP/DOWN mode
Output mode
Output time
Input signal time
Key protect level
UP/DOWN mode
Press the
MODE key
Press the
MODE key
Present value,
set value
Run mode
Output mode
Description
Compared to the present value.
Determines the timing of the control
output according to the output mode.
Turns ON the batch output when
the preset number of cycles have been
completed.
Determines the timing range.
Selects the display that shows elapsed
time (UP) or time remaining (DOWN).
Determines the control output type.
(Refer to the Operation Modes Timing
Charts on pages 18 to 21.)
Determines the duration of the control
output. Will be displayed when the
output mode is A, A-1, A-2, A-3, B,
or B-1. Will not be displayed in
output modes D, E, or F.
Changes the duration of the control
and reset input signals.
Locks certain keys to prevent accidental
operation. The key protection level,
kP-1 to kP-4, determines which keys are
locked when the key protection input
is ON. The locked keys are crossed
out in the diagram at right.
Press the
DISPLAY key
Press the
BATCH key
Press the
MODE key
Batch count value,
set value
Output time
Press the
DISPLAY key
Press the
MODE key
10
Input signal time
Note: 1. Set values are changed using
Press the
MODE key
<kP–1>
<kP–3>
Setting procedure
Sequence when changing a digit using the
increment keys (1 to 4).
Sequence when changing a digit using the
increment keys (1 to 4).
Change the timing range with the increment
keys (1 to 4).
Select UP/DOWN with the increment keys
(1 to 4).
Sequence when changing the mode using the
increment keys (1 to 4).
Use keys 1 to 3 to change the value.
Key 1 adjusts the first digit (0.1 digit).
Key 2 adjusts the second digit (1 digit).
Key 3 adjusts the third digit (10 digit).
Key 4 selects either hold output or one-shot output.
Change the duration with increment keys
(1 to 4).
Sequence when changing the key protect
level using the increment keys (1 to 4).
2. The large arrow indicates the
Key protect
level
the increment keys (1 to 4).
parameter displayed first when the mode
is changed with the MODE or DISPLAY key.
<kP–2>
<kP–4>
H5BR