RU-MX5 RADIO DESIGN LABS, RU-MX5 Datasheet - Page 3

• Manufacturer Part Number: RU-MX5
• Description: RDL FIVE INPUT MIC/LINE MIXER, INPUT IMPEDANCE: (BALANCED MIC) 150-600 OHM, (UNBALANCED MIC) 5 KOHM, (BALANCED OR UNBALANCED LINE) 10 KOHM, MIC LEVEL OUTPUT: -45 DBU, LINE LEVEL OUTPUT: DBU AT 150 OHM, MIC FREQUENCY RESPONSE: 70 HZ-
• Manufacturer: RADIO DESIGN LABS

RACK-UP
Model RU-MX5
Audio Mic/Line Mixer
TYPICAL PERFORMANCE
Inputs:
Input Impedance:
Line Level Output:
Mic Level Output:
Gain:
Frequency Response:
External Phantom Power:
Total Harmonic Distortion:
Headroom:
Metering:
Noise:
Power Requirements:
891-0054I
®
SERIES
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
U.S.A. [phone], [phone]; Fax: [phone]
Radio Design Labs Technical Support Centers
4 Selectable Mic or Line Level; 1 dedicated Line Level
Mic:
Line:
200Ω to drive Low or High Impedance Balanced or Unbalanced Lines;
150Ω Balanced; -45 dBu
Mic:
Line:
Mic:
Line:
24 Vdc Maximum
< 0.030% (0.0125% typical)
> 18 dB above +4 dBu output
3 LED Indicators; -20 dB, 0 dB, +5 dB, Peak Reading
(0 dB Referred to Balanced Line Output of +4 dBu)
< -70 dB Below +4 dBu Output
(All Channels Active; Mic Gain = 50 dB; Line Gain = Unity)
24 to 33 Vdc @ 65 mA, Ground-referenced
150 to 600 Ω Balanced; 5 kΩ Unbalanced
10 kΩ Balanced or Unbalanced
Off to 65 dB
Off to 15 dB
70 Hz - 30 kHz (+/- 1.5 dB)
20 Hz - 20 kHz (+/- 0.5 dB)
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
+4 dBu