DD-9639BE-3A DENSITRON, DD-9639BE-3A Datasheet - Page 29

• Manufacturer Part Number: DD-9639BE-3A
• Description: PMOLED, 96*39, BLUE
• Manufacturer: DENSITRON

Specifications of DD-9639BE-3A

• Resolution: 96 X 39
• Viewing Area (h X W): 9.858mm X 21.372mm
• Pixel Size (h X W): 0.182mm X 0.182mm
• Voltage Rating: 2.8V
• Interface: Parallel, Serial
• Svhc: No SVHC (15-Dec-2010)
• Interface Type: Parallel, Serial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

unused for a while, normal state can be restored. Also, there will be no problem in the reliability of the
module.
To protect OEL display modules from performance drops by static electricity rapture, etc., do not
touch the following sections whenever possible while handling the OEL display modules.
* Pins and electrodes
* Pattern layouts such as the COF
With this OEL display module, the OEL driver is being exposed. Generally speaking, semiconductor
elements change their characteristics when light is radiated according to the principle of the solar
battery. Consequently, if this OEL driver is exposed to light, malfunctioning may occur.
* Design the product and installation method so that the OEL driver may be shielded from light in
actual usage.
* Design the product and installation method so that the OEL driver may be shielded from light during
the inspection processes.
Although this OEL display module stores the operation state data by the commands and the indication
data, when excessive external noise, etc. enters into the module, the internal status may be changed. It
therefore is necessary to take appropriate measures to suppress noise generation or to protect from
influences of noise on the system design.
We recommend you to construct its software to make periodical refreshment of the operation statuses
(re-setting of the commands and re-transference of the display data) to cope with catastrophic noise.
DD-9639BE-3A
REV. A
Product No.
Page
29 / 29
Copyright ©2009 DENSITRON TECHNOLOGIES plc. All rights reserved. – Proprietary Data