LH1D-D2HQ4C10-G IDEC, LH1D-D2HQ4C10-G Datasheet - Page 7

• Manufacturer Part Number: LH1D-D2HQ4C10-G
• Description: INDICATOR, LED PANEL MNT, GREEN, 24V
• Manufacturer: IDEC

Specifications of LH1D-D2HQ4C10-G

• Led Color: Green
• Forward Current If: 17mA
• Forward Voltage: 24V
• Lens Style: Dome
• Lens Width: 30mm
• Operating Temperature Range: -20°C To +55°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Replacement Parts
Panel Mounting
Using two M3 screws, install the LH indicator to a mounting surface. Tighten the screws to a torque of 0.6 N·m maximum.
Mounting screws are not provided and must be supplied by the user.
Note: The dome lens is not removable. Do not attempt to remove the
1.
2.
3.
Instructions
Inserting Marking Film into Flat Type Lens
Lens (flat type)
Insert a flat screwdriver into the groove between the base and
lens.
Twist the screwdriver and disengage the lens from the
base.
Remove the lens from the base.
Base
lens, otherwise damage will occur.
Shape
M3 Screws
Lens
Lens
Polyarylate
Material
Housing
LH9Z-1DLH2- k
Part Number
Note 1: Do not install the LH indicator by attaching the lens only, such
Note 2: Make sure that the back of the indicator is securely attached
4.
5.
Note 1: Do not touch the gasket, as this may affect its waterproof
Note 2: Do not touch the diffusion plate.
Markings
Legends and symbols can be printed on
marking film that can be used with the
flat lens. One 0.1mm-thick film can be
inserted.
Marking films are not inlcuded and must
be supplied by the user.
Recommended marking film: Polyester
Insert the edge of a marking film into the gap between the base
and the diffusion plate, and place the marking film on top of the
diffusion plate.
Replace the lens. Ensure that the lens is installed snugly.
characteristics.
as by taping down on the lens as the internal components may
come loose.
to the mounting surface so that the lens cannot be easily
removed.
Gasket
For flat type.
Specify a color code in place of k in the Part No.
A: amber
G: green
C: clear
R: red
S: blue
Y: yellow
Note: Use C (clear) lens for R/G (red/green alternate),
W (warm white), or PW (cool white) illumination.
M3 Screws
Lens
Diffusion Film
Marking Film
k Lens Color
Housing
�35 mm
Lens installed on the
base snugly.
No gap
Marking Area
(�33 mm)
Thickness:
= 0.1 mm
7