K80LGRY2NQ BANNER ENGINEERING, K80LGRY2NQ Datasheet - Page 2

• Manufacturer Part Number: K80LGRY2NQ
• Description: INDICATOR, LED PANEL GRN/RED/YELLOW, 30V
• Manufacturer: BANNER ENGINEERING

Specifications of K80LGRY2NQ

• Led Color: Red / Yellow / Green
• Forward Current / Color: 50mA
• Forward Voltage / Color: 30V
• Current Rating: 50mA
• Forward Voltage: 30VDC
• Operating Temperature Range: -40°C To +50°C
• Color: Green/Red/Yellow
• Forward Current If: 50mA

Supply Voltage and Current
Indicators
Input Response Time
Indicator Flash Rate
EZ-LIGHT
2
M18 Models: 10 to 30V dc @ 40 mA max.
T30 Models: 10 to 30V dc @ 50 mA max.
K50L, K50FL and K80L Models: 18 to 30V dc @ 50 mA max.
Entire translucent diffuser or dome provides indication.
LEDs are independently selected: Green, Red, Yellow, ON steady or flashing.
For other colors/combinations, contact Factory for availability.
Indicator ON: 250 ms (max.)
Indicator OFF: 10 ms (max.)
Single Color: 1 second flash rate (500 ms ON)
Three Color: 1.5 second rotation rate (500 ms per color)
16.0 [0.63"]
P/N 121902 rev. G
[2.36"]
60.0
M18 Models
™
– 3-Color, 7-Function
K50FL Models
40.0 [1.58"]
Ø50 [1.97"]
2x 5.0 [0.20"]
2x 5.5 [0.21"]
[1.38"]
2x 5.0 [0.20"]
35.0
44.6 [1.76"]
17.0 [0.67"]
Specifications
T30 Models
Dimensions
Environmental Rating
Connections
Operating Conditions
IEC IP67
K80L has encapsulated electronics only; other models fully encapsulated
K80L Models: 5-pin Euro-style integral QD (Q) standard. Terminal-wired models
available for use with bulk cable; compression fitting optional. Contact Factory for
cable information.
Other Models: 5-pin Euro-style integral QD (Q); 6" pigtail QD (QP), (do not use
center pin 5); or 5-wire, 2 m (6.5') integral cable
Temperature: –40° to +50° C (–40° to +122° F)
Max. Torque 1.12 Nm (10 in–lbf)
4X Ø 5.5 mm (Ø 0.22")
with supplied screws
Max. Torque 1.12 Nm (10 in–lbf)
65.0 mm
(2.56")
4X 8–32 UNC
80.8 mm
(3.18")
Banner Engineering Corp.
65.0 mm
(2.56")
www.bannerengineering.com • Tel: [phone]
K80L Models
Max. Torque 2.25 Nm
Internal Threads
(mounting nut
½ - 14 NPSM
included)
(20 in–lbf)
M30x1
26.0 mm
(1.02")
M12 X 1
K50L Models
•
Minneapolis, MN U.S.A.
50.0 mm
(1.97")
Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)
66.3 mm
(2.61")
11 mm (0.43")
38 mm (1.50")*
20 mm (0.79")
109.5 mm
(4.31")