50165FA MOFLASH SIGNALLING, 50165FA Datasheet - Page 2

• Manufacturer Part Number: 50165FA
• Description: SPECTRUM INTERFACE UNIT
• Manufacturer: MOFLASH SIGNALLING

Specifications of 50165FA

• Svhc: No SVHC (18-Jun-2010)
• Rohs Compliant: YES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The Control Signal
The Control Signal must consist
of a 5-bit word, which has to be
assembled and transmitted in
parallel mode to the Spectrum
Beacon. The colour, flash frequency
50165 Interface Unit
for further information download Interface Data Sheet from the website
The Interface Unit contains
seven electrically isolated
prioritised channels. Each
channel accepts 24-230v Ac or
12-48v Dc input. A pre-selected
audio and/or visual signal is
supplied for each of the seven
channels. In the event of no
signal being applied, the
beacon displays continuous
green. The operating voltage for
the unit is 230v Ac. The design
allows for a 12v Dc auxiliary
Technical Specification
Type
Light Source
Signal Options
Sounder Type
Operating Temp
Enclosure Material
Ingress Protection
Beacon Control
LEDA600-01
LEDA600-03
Ultra-bright Tri-colour LEDs
Amber
Green
Red
Continuous
Slow Flash
Rapid Flash 1
Rapid Flash 2
Electronic Piezo Sounders x 2 :
db@1m
Frequency
Visual and audible signalling options can be combined –
audible signal synchronised with beacon flash
-35
UV Stable Polycarbonate Plastic
IP65 & IP67 as standard as one enclosure.
IP66 with sounder covers fitted. Sounder covers can be fitted
(snap-fixed) or permanently (adhered) into place.
Sounder covers supplied as standard.
The beacon is supplied with flying leads 2 x 1metre
4 core power cables and 6 core signal cables.
For further information download the Technical Data Sheet from our website.
O
C to +55
O
C
24v Dc or 230v Ac
24v Dc or 115v Ac
3.9 Effective Candela (390 mcd) 450mA
6.2 Effective Candela (620 mcd) 265mA
4.4 Effective Candela (440 mcd) 265mA
ON
60 fpm
90 fpm (0.11sec ON, 0.23 OFF)
90 fpm (0.23sec ON, 0.11 OFF)
90dB ±3dB (horn covers not installed)
3.1Hz ±500Hz
power supply for use in volt free
applications. Additionally, the unit
incorporates a battery [not supplied]
back-up sufficient to maintain the unit for
12 hours in case of mains power failure.
Provision is made for mains failure to be
signalled from the interface unit (device
not supplied). The unit is supplied
complete with mounting plate and cover.
This can be installed either inside an
existing enclosure or into a standard
weatherproof ‘Fibox’ IP67 mounting box
[ref. MNX PCM200/63 G].
and sound are independent of one
another but a colour signal is
necessary for the control word to be
accepted, thus any word beginning
with 00 will not be accepted.
Weight
(Optional)
0.85 kg
20mA
Visual Signals
LIGHT EMITTING DIODE
Mounting Options
The beacon has three mounting
options:
Surface Mount Plate
(3 point DIN fix) fitted as standard
Side knockouts x 2 cabling in/out
(15mm x 10mm)
Foot and Pole Mount (50166)
Right Angled Wall Bracket (50004)
BEACONS