HEDS-9140-B00 Avago Technologies US Inc., HEDS-9140-B00 Datasheet - Page 7

• Manufacturer Part Number: HEDS-9140-B00
• Description: En, Rop= 11mm, 3Ch 1000CPR
• Manufacturer: Avago Technologies US Inc.
• Series: HEDSr

Specifications of HEDS-9140-B00

• Encoder Type: Optical
• Output Type: Quadrature with Index (Incremental)
• Pulses Per Revolution: 1000
• Voltage - Supply: 5VDC
• Actuator Type: Codewheel Not Included
• Detent: No
• Built In Switch: No
• Mounting Type: Chassis Mount
• Orientation: Vertical
• Termination Style: Terminal Pins
• Product: Optical
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Rotational Life (cycles Min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Electrical Interface
To insure reliable encoding performance, the HEDS-9040
and 9140 three channel encoder modules require 2.7
kΩ (±10%) pull-up resistors on output pins 2, 3, and 5
(Channels I, A and B) as shown in Figure 1. These pull-up
resistors should be located as close to the encoder mod-
ule as possible (within 4 feet). Each of the three encoder
module outputs can drive a single TTL load in this con-
fi guration.
Figure 2. HEDS-9X40 Mounting Tolerance.
7
Figure 1. Pull-up Resistors on HEDS-9X40 Encoder Module Outputs.
Mounting Considerations
Figure 2 shows a mounting tolerance requirement for
proper operation of the HEDS-9040 and HEDS-9140. The
Aligning Recess Centers must be located within a toler-
ance circle of 0.005 in. radius from the nominal locations.
This tolerance must be maintained whether the module
is mounted with side A as the mounting plane using
aligning pins (see Figure 5), or mounted with Side B as
the mounting plane using an alignment tool (see Figures
3 and 4).