HFBR-57E5APZ Avago Technologies US Inc., HFBR-57E5APZ Datasheet - Page 3

• Manufacturer Part Number: HFBR-57E5APZ
• Description: MM LC SFP FE DMI ROHS
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-57E5APZ

• Data Rate: 125MBd
• Wavelength: 1310nm
• Applications: Ethernet
• Voltage - Supply: 3 V ~ 3.6 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Optical Fiber Type: TX/RX
• Optical Rise Time: 3/2.2ns
• Optical Fall Time: 3/2.2ns
• Operating Temperature Classification: Industrial
• Peak Wavelength: 1308/1380nm
• Package Type: SFP
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 85C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Functional Data I/O
The HFBR-57E5APZ fiber-optic transceiver is designed to
accept industry standard differential signals. The trans-
ceiver provides an AC-coupled, internally terminated data
interface. Coupling capacitors have been included within
the module to reduce the number of components on the
customer’s board. Figure 3 depicts the recommended
interface circuitry.
Regulator Compliance
See Table 1 for transceiver Regulatory Compliance perfor-
mance. The overall equipment design will determine the
certification level. The transceiver performance is offered
as a figure of merit to assist the designer.
Electrostatic Discharge (ESD)
There are two conditions where immunity to ESD damage
is important. Table 1 documents our immunity to both
these conditions.
The first condition is static discharge to the transceiver
when handling it. For example when the transceiver is
inserted into the transceiver port. To protect the trans-
ceiver, it is important to use normal ESD handling proce-
dures. These precautions include grounded wrist straps,
workbenches, and floor maps in ESD controlled areas. The
ESD sensitivity of the HFBR-57E5APZ is compatible with
typical industry production environments.
The second condition is static discharge to the exterior
of the host equipment chassis after installation. To the
extent that the duplex LC optical interface is exposed
to the outside of the host equipment chassis, it may be
subject to system-level ESD events. The ESD performance
of HFBR-57E5APZ exceeds typical industry standards.
Table 1. Regulator Compliance
3
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
RoHS Compliance
Test Method
MIL-STD-883C
Variation of IEC 61000-4-2
CENELEC CEN55022 Class B
Variation of IEC 61000-4-3
AEL Class 1
EN60825-1 (+A11)
Performance
HBM 2 kV
Typically withstand at least 25 kV without damage when the LC
connector receptacle is contacted by a Human Body Model probe.
System margins are dependant on customer board and chassis
design.
Typically shows a negligible effect from a 10 V/m field swept
from 80 to 450 MHz applied to the transceiver without a chassis
enclosure.
Compliant per Avago testing under single fault conditions.
Reference to EU RoHS Directive 2002/95/EC
Immunity
Equipment hosting the HFBR-57E5APZ will be subjected
to radio-frequency electromagnetic fields in some en-
vironments. These transceivers have good immunity to
such fields due to their shielded design.
Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed trans-
ceivers from Avago will be required to meet the require-
ments of CENELEC EN55022.
The metal housing design and shielded design of the
HFBR-57E5APZ transceiver minimize the EMI challenge
facing the host equipment designer. The transceivers
provide superior EMI performance.
Eye Safety
These transceivers provide Class 1 eye safety by design.
Avago has tested the transceiver design for compliance
with the requirements listed in Table 1 under normal
operating conditions and under a single fault condition.
Flammability
The HFBR-57E5APZ transceiver housing is made of metal
and high strength, heat resistant, chemically resistant and
UL-94V-0 flame retardant plastic.
Shipping Container
10 transceivers are packaged in one shipping container
designed to protect it from mechanical and ESD damage
during shipment or storage.