28401.0-00 STEGO, 28401.0-00 Datasheet - Page 49

• Manufacturer Part Number: 28401.0-00
• Description: Pressure Compensation Plug
• Manufacturer: STEGO

Specifications of 28401.0-00

• Accessory Type: Pressure Compensation Device
• Pack Quantity: 1
• Body Material: 316L Stainless Steel
• For Use With: Enclosures
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
Application examples
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
09510.0-01
Part No.
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
STEGOFIX is a small aid specially designed to make mounting of smaller DIN rail mountable
components easier. It can be used whenever the installation of a DIN rail is impractical, or
when there is not enough space left in an enclosure.
Because of its industrial grade self-adhesive it can be installed much easier and quicker than a
conventional DIN rail, without the effort of hole drilling and screw mounting. This is especially
practical for subsequent changes or additions in an already equipped enclosure.
STEGOFIX can hold components up to 1.1 lbs in weight. Some of the many applications include
the mounting of timing relays, series terminals, thermostats, cable channels and even small
heaters. In addition, DIN rails can be mounted simply by using several STEGOFIX units.
If the weight of attached components exceeds the load limit, or if a more secure mounting is
desired, (e.g. on rough surfaces), it can also be screw-mounted. All that is necessary to install
STEGOFIX is a smooth and clean surface. The initial adhesive power is 40%, and after 24 hours,
it has its full holding power of 1.1 lbs.
| |
Technical Data
Load
Mounting
Material
Hole pattern
Operating / Storage temperature
Dimensions
*depending on the conditions of use (e.g. surface condition, size of the device to be mounted, etc.) higher
loads were achieved.
Installation
STEGOFIX can only be mounted on smooth surfaces, e.g. metals, lacquered surfaces and plastics (except
polyethylene, polypropylene and rubber). The surfaces must be dry and free from dust, oil, separating agents
and other contamination.
1 packing unit
5 pieces
STEGO FIX Self-adhesive Mounting Aid
0.5” (12.8 mm)
1.1” (27.5 mm)
1.7” (43 mm)
1.1 lbs. (500g) after a 24 hour waiting period*
self-adhesive (non-aging, high-performance adhesive strip)
plastic UL 94V-0, black
0.5” distance, Ø 0.14” (12.8mm; Ø 3.6mm)
-49 to +158°F (-45 to 70°C)
1.7 x 1.5 x 0.55” (43 x 38 x 14mm)
2.1 oz. (60g) total / 0.42 oz. (12g) per piece
0.55” (13.5 mm)
Weight (approx.)