A18SBASE HOFFMAN ENCLOSURES, A18SBASE Datasheet - Page 5

• Manufacturer Part Number: A18SBASE
• Description: Consolets Pedestal Base
• Manufacturer: HOFFMAN ENCLOSURES

Specifications of A18SBASE

• Accessory Type: Pedestal Base
• External Width: 18"
• Body Material: Steel
• Features: Leveling Screws And Holes For Bolting To Floor
• External Height: 18"
• For Use With: Consolet Enclosures, 4 X 4 In Pedestal Column
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Swivel Tilt
The use of a combination swivel and tilt mechanism allows a machine
operator to rotate and also tilt an HMI enclosure for optimum viewing
and safe operation. The Swivel Tilt is designed for use between the
bottom of an HMI enclosure and a pedestal (enclosure reinforcement
may be required).
Do not use the Swivel Tilt between an overhead support and an
enclosure.
The swivel feature allows maximum rotation of 350 degrees. Integral
stops are provided at 30-degree increments between 60 degrees
and 180 degrees of rotation. Swivel can be locked in any position.
Tilt feature allows forward and backward movement up to 30
degrees from horizontal. Tilt lock has a large release knob that allows
quick incremental adjustment. Top and bottom flanges allow easy
installation on pedestals. A large center opening accommodates
control cables that have attached plugs. Swivel Tilt is cast aluminum
with an anodized finish. Mounting hardware and gaskets are
furnished.
Bulletin: P1
Swivel
A swivel mechanism can be used to provide a machine operator a
way to easily rotate an operator interface enclosure to a convenient
operating position. Maximum rotation is 350 degrees. The low-profile
swivel has a large center opening in addition to a large, wobble-free
bearing surface. Swivel mechanism can be locked in any position.
The swivel mechanism is designed for use between the bottom of an
operator interface enclosure and a pedestal.
Do not use the Swivel between an overhead support and an
enclosure.
The Swivel is cast aluminum with an anodized finish. Mounting
hardware and gaskets are furnished.
Integral stops are provided at 30-degree increments between 60
degrees and 180 degrees of rotation on catalog number ASWV88
only.
Bulletin: P1
Subject to change without notice
PH [phone] • FX [phone] • hoffmanonline.com
Pedestals and Pedestal Accessories
Catalog
Number
AST44
AST88
The loads listed assume that the additional load is centered on the front or back of the enclosure. Please
contact Hoffman for specific application information.
Catalog
Number
ASWV44
ASWV88
The loads listed assume that the additional load is centered on the front or back of the enclosure. Please
contact Hoffman for specific application information.
AxBxC mm/
in.
148 x 102 x 102
5.81 x 4.00
x 4.00
203 x 203 x 203
8.00 x 8.00
x 8.00
AxBxC mm/
in.
27 x 102 x 102
1.06 x 4.00
x 4.00
33 x 203 x 203
1.28 x 8.00
x 8.00
Maximum
Enclosure
Size A x B x C
mm/in.
610 x 610 x 406
24.00 x 24.00 x
16.00
838 x 610 x 610
33.0 x 24.00 x
24.00
Maximum
Enclosure
Size A x B x C
mm/in.
610 x 610 x 406
24.00 x 24.00 x
16.00
838 x 610 x 610
33.00 x 24.00 x
24.00
© 2011 Pentair Technical Products
Maximum Load
Including Enclosure
(kg)
34.0
68.0
Maximum Load
Including Enclosure
(kg)
45.4
90.7
Spec-00485 H
Maximum Load
Including Enclosure
(lb.)
75
150
Maximum Load
Including Enclosure
(lb.)
100
200
5