HAAV-27 IDEC, HAAV-27 Datasheet - Page 2

• Manufacturer Part Number: HAAV-27
• Description: HAAV-27 L6 EMERG.STOP YELLOW N.P
• Manufacturer: IDEC

2
The World’s First ø16 mm, 4-contact Emergency Stop Switch.
Compact size - only 27.9 mm deep behind the panel.
Illumination Ratings
Note: Except for stop switches (operator color: gray).
Contact Ratings
• Minimum applicable load: 5V AC/DC, 1 mA (reference value)
• The rated operating currents are measured at resistive/inductive load types
• 1 to 4NC main contacts and 1NO monitor contact
• The depth behind the panel is only 27.9 mm for 1 to 4
• IDEC’s original “Safe break action” ensures that the con-
• Push-to-lock, Pull or Turn-to-reset operator
• Two operator sizes: ø29 and ø40 mm
• Safety lock mechanism (IEC60947-5-5, 6.2)
• Degree of protection IP65 (IEC60529)
• Direct opening action mechanism (IEC60947-5-5, 5.2,
• UL, c-UL recognized. EN compliant
• RoHS compliant (EU directive 2002/95/EC). Contains no
(NC main contacts/NO monitor contact)
Rated Insulation Voltage (Ui)
Rated Current (Ith)
Rated Operating Voltage (Ue)
UL508
CSA C22.2 No. 14
EN60947-5-1
EN60947-5-5 (Note)
GB14048.5
(Operating area may vary according to the operating conditions and load
types.)
specified in IEC 60947-5-1.
contacts.
tacts open when the contact block is detached from the
operator.
IEC60947-5-1, Annex K)
lead, cadmium, mercury, hexavalent chromium, PBB, or
PBDE.
Main
Contacts
Monitor
Contacts
Rated Voltage
ø16mm XA
24V AC/DC
Standard
AC
50/60 Hz
DC
AC
50/60 Hz
DC
Operating Voltage
24V AC/DC ±10%
Resistive Load
(AC-12)
Inductive Load
(AC-15)
Resistive Load
(DC-12)
Inductive Load
(DC-13)
Resistive Load
(AC-12)
Inductive Load
(AC-14)
Resistive Load
(DC-12)
Inductive Load
(DC-13)
Mark
Series
UL/c-UL File No. E68961
TÜV Product Service
European Commission’s Low
Voltage Directive
CCC
No. 2005010305150899
300V (illuminated part: 60V)
Approval Organization/
30V
2A
1A
2A
1A
–
–
–
–
Rated Current
File No.
Illuminated Emergency Stop Switches
0.22A
0.22A
125V
1.5A
0.4A
1.2A
0.6A
0.4A
5A
3A
11 mA
250V
1.5A
0.2A
0.1A
0.6A
0.3A
0.2A
0.1A
3A
Specifications
Note: Except for stop switches (operator color: gray).
Applicable Standards
Operating Temperature
Operating Humidity
Storage Temperature
Operating Force
Minimum Force
Required for Direct
Opening Action
Minimum Operator
Stroke Required for
Direct Opening Action
Maximum Operator
Stroke
Contact Resistance
Insulation Resistance
Overvoltage Category
Impulse Withstand
Voltage
Pollution Degree
Operation Frequency
Shock Resistance
Vibration Resistance
Mechanical Life
Electrical Life
Degree of Protection
Short-circuit Protection
Conditional
Short-circuit Current
Terminal Style
Recommended
Tightening Torque
for Locking Ring
Connectable Wire
Soldering Conditions
Weight
Direct Opening Action
IEC60947-5-1, EN60947-5-1
IEC60947-5-5 (Note), EN60947-5-5 (Note)
JIS C8201-5-1, UL508, CSA C22.2 No. 14
–25 to +55°C (no freezing)
45 to 85% RH (no condensation)
–45 to +80°C
Push to lock: 10.5N
Pull to reset:
Turn to reset: 0.16 N·m
60N
4.0 mm
4.5 mm
50 mΩ maximum (initial value)
100 MΩ minimum (500V DC megger)
II
2.5 kV
3 (inside LED unit: 2)
900 operations/hour
Operating extremes: 150 m/s
Damage limits:
Operating extremes: 10 to 500 Hz, amplitude 0.35
Damage limits:
250,000 operations minimum
100,000 operations minimum
250,000 operations minimum (24V AC/DC, 100 mA)
IP65 (IEC60529)
250V/10A fuse
(Type aM, IEC60269-1/IEC60269-2)
1000A
Solder terminal, PC Board terminal
0.88 N·m
1.25 mm
310 to 350°C, 3 seconds maximum
ø29 mm type: 23g, ø40 mm type: 28g
2
maximum (AWG16 maximum)
10N
1000 m/s
mm acceleration 50 m/s
10 to 500 Hz, amplitude 0.35
mm acceleration 50 m/s
2
2
2
2