DLRO10HD Megger, DLRO10HD Datasheet - Page 3

• Manufacturer Part Number: DLRO10HD
• Description: DIGITAL OHMMETER, LOW RES., 0 TO 2.5KOHM
• Manufacturer: Megger

Specifications of DLRO10HD

• Wire Connection: 2-Wire
• Resistance Measuring Range: 0 To 2.5kohm
• Resolution (ohm): 100mohm
• Test Current: 10A
• Accuracy: ± 0.2%
• External Height: 181mm
• External Width: 285mm
• External Depth: 315mm
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Cat. No. 242009-18
Helical Hand Spikes with Spring Points and
Current Pushbutton Switch
Hand spikes with a switch and spring-loaded tips that
compress and rotate to ensure good contact. Depressing
the momentary contact switch will start the current flow.
The spacing between P and C probes is 0.4 in. (10 mm).
Current: 10 A
Will fit: DLRO10, DLRO10X, 247000, 247001, 247002,
247101, 247102
Cat. No.
242009-18
Cat. No. 242002-7
Heavy Duty Fixed Point Hand Spikes
Economical, light weight and built for durability. Spikes
are not spring loaded. Spacing between C and P probe
tips is 0.35 in. (9 mm).
Current: 10 A
Will fit: DLRO10HD, DLRO10, DLRO10X, 247000, 247001,
247002, 247100, 247101, BT51
Cat. No.
242002-7
242002-18
242002-30
18 ft (5.5 m)
18 ft (5.5 m)
30 ft (9 m)
7 ft (2 m)
Length
Length
Cat. No. 242003-7
Cat. No. 242104-2-16
Replaceable Needle Points
These fine-tipped replaceable points are ideal for smaller
parts and surfaces. Both of the P and C points are
replaceable and are mounted in easy-to-hold handles.
Current: 10 A
Will fit: DLRO10HD, DLRO10, DLRO10X, 247000, 247001,
247002
Cat. No.
242003-7
Heavy Duty C-Clamps
Kelvin clamps, current passes through the C-clamp and
screw thread, the potential passes through a four-point
anvil insulated from the clamp.
Current: 100 A
Clamp Capacity: 4 in. (10 cm)
Will fit: 247100, 247101 DLRO200*, DLRO600*
(*only to 100 A)
Cat. No.
242104-2-16
242104-2-26
16 ft (5 m)
26 ft (8 m)
Digital Low Resistance Ohmmeters
7 ft (2 m)
Length
Length
TEST LEADS