TG2000 AIM-TTI INSTRUMENTS, TG2000 Datasheet - Page 2

• Manufacturer Part Number: TG2000
• Description: FUNCTION GENERATOR FREQUENCY/PULSE 20MHZ
• Manufacturer: AIM-TTI INSTRUMENTS

Specifications of TG2000

• Signal Generator Type: Pulse
• Bandwidth: 20MHz
• Modulation Type: Gated/Sweep/AM/FSK/Tone/Internal Trigger/Gate Generator
• External Height: 88mm
• External Width: 260mm
• External Depth: 235mm

A new price point
The TG1000/2000 breaks new ground by offering a high quality
DDS function generator at a significantly lower price.
DDS (direct digital synthesis) is a technique for generating
waveforms digitally using a phase accumulator, a look-up table
and a DAC. The accuracy and stability of the resulting wave-
forms is related to that of the crystal master clock.
When correctly engineered, the DDS generator offers not only
exceptional accuracy and stability but also high spectral purity,
low phase noise and excellent frequency agility.
Total digital control
Unlike some other generators which only provide digital control
of frequency, every function is digitally controlled enabling
complete instrument set-ups to be stored, or full remote control
to be implemented (TG2000 only).
A value-for-money 10MHz or 20MHz function generator
u
u
u
u
u
u
u
u
u
0.001Hz to 10MHz or 20MHz frequency range, 6 digits or 1mHz setting resolution.
1ppm stability and better than 10 ppm absolute accuracy for one year.
Sine, square, triangle, positive pulse and negative pulse waveforms.
Low distortion, high spectral purity sine waves.
Internal sweep, linear or logarithmic, full range phase continuous, adjustable marker.
Modulations modes of gated, AM, FSK and tone switching; built-in trigger generator.
5mV to 20V pk-pk output from 50 W or 600 W ; plus multi function auxiliary output.
Storage for up to nine complete instrument set-ups in non-volatile memory.
Fully programmable via RS-232 or USB interfaces (TG2000 only).
with the precision of Direct Digital Synthesis
Wide frequency and amplitude range
The TG2000 can generate waveforms between 0.001Hz and
20MHz with a resolution of six digits and a one year accuracy
better than 10ppm. The TG1000 has a 10MHz limit.
Amplitude is variable between 5mV and 20V pk-pk from a source
impedance of 50W or 600W.
Unlike many generators, the waveform quality remains excellent
over the full amplitude range.
RS-232 and USB interfaces
The TG2000 also includes both an RS-232 interface and USB
interface.
These interfaces can be used for remote control of all of the in-
strument functions and for remotely storing instrument
set-ups.