CRT1-OD16SL Omron, CRT1-OD16SL Datasheet - Page 555

• Manufacturer Part Number: CRT1-OD16SL
• Description: 16 Out NPN Cage Clamp
• Manufacturer: Omron

Specifications of CRT1-OD16SL

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

User Scaling
Offset Compensation
Analog I/O Slave Unit (output) Functions
Note Reverse scaling, where the 0% scaling value is higher than the 100% scaling
Note The offset value can be set even when using default scaling.
Upper limit 7FFE hex (32766)
Lower limit 8000 hex (−32768)
User scaling allows analog output values to be scaled to user-defined values.
The conversion values for 100% and 0% are set using the CX-Integrator.
value, is also supported.
Offset compensation is used to compensate for error that occurs during scal-
ing. The offset amount is added to the scaled line before processing, as
shown in the following diagram. The offset (error) value can be input between
–
100% or 0% output will not be possible. The High Limit is 7FFE hex and the
Low Limit is 8000 hex.
100%
0%
Discon-
nected
line
28,000 and 28,000, but if underflow or overflow occurs in the scaled line, the
100% value set by user
(scaling point 2)
range
0% value set by user
(scaling point 1)
Input
100% scaling value
0% scaling value
Set using CX-Integrator (–28,000 to 28,000)
Set using CX-Integrator (–28,000 to 28,000)
---
0 to 5 V
Scaling value
---
0 to 10 V
0%
Output conversion
Cannot output 100% value
even if it is set to 7FFF.
7FFF hex
1 to 5 V
0%
---
–10 to
10 V
100%
100%
---
20 mA
Output (signal) range
Offset value
(–28,000 to +28,000)
0 to
Scaling line
Section 11-5
Output signal ran
7FFF hex
20 mA
4 to
531