TFP02WL TIMEGUARD, TFP02WL Datasheet - Page 7
![SOCKET, RCD, LATCHING, SINGLE, WHITE](/photos/23/82/238292/pl0950406-40_sml.jpg)
TFP02WL
Manufacturer Part Number
TFP02WL
Description
SOCKET, RCD, LATCHING, SINGLE, WHITE
Manufacturer
TIMEGUARD
Datasheet
1.TFA01W.pdf
(12 pages)
Specifications of TFP02WL
Approval Category
BS7288 And BS1363
Colour
White
No. Of Gangs
1
No. Of Output Channels
1
Pack Quantity
1
Trip Time
40ms
Svhc
No SVHC (15-Dec-2010)
No. Of Outputs
1
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
General RCD Instructions
The RCD should form part of a 30A ring main or terminate a spur
off a 30A ring main. The cable connecting to the supply to the RCD
should be either: 2 x 2.5 sq mm for the ring main or 1 x 2.5 sq mm
for the spur.
TFP10WL only – Fit the appropriate BS1362 fuse to suit the load
appliance to be connected.
The cable connecting the load appliance (spur only) should be rated
according to the fuse fitted to the connection unit.
Strip sleeving and insulation and cut wires as required for the
appliance cable. Tighten the screw terminals onto the exposed wires
maintaining the correct polarity, then fit the cable into the cable
clamp groove and tighten down the clamp box to retain the cable.
All RCDs – Ensure that there is sufficient length of the supply cable
6
tail(s) to enable easy wiring. Strip sleeving and insulation and cut
wires as required. Tighten the screw terminals onto the exposed
wires maintaining correct polarity and offer the unit up to the wall
box, forming the cable as required. Screw RCD to wall box and
tighten sufficiently to hold in place. Do not over tighten.
Note: with some makes of BS4662 boxes it will be necessary to bend
back the upper and lower fixing lugs to enable the RCD to be fitted.