TPSL01 TIMEGUARD, TPSL01 Datasheet - Page 9

• Manufacturer Part Number: TPSL01
• Description: SWITCH, WEATHERPROOF, 1GANG, IP55
• Manufacturer: TIMEGUARD

Specifications of TPSL01

• Rohs Compliant: NA
• Svhc: No SVHC (15-Dec-2010)

2.3.1 Sockets
In spur configuration we recommend feed cable of 1.5 sq. mm for
the single socket and 2.5 sq. mm for the double socket. If the unit is
to form part of a ring then incoming and outgoing cables must
both be 2.5 sq. mm (with the double socket we recommend that
the incoming and outgoing cables can be connected to one socket
each with a 2.5 sq. mm bridging cable between the two sockets.
Use back box earthing terminals to maintain earth continuity where
required.
With the TP203 switch and socket the double pole switch may be used
independently from the socket for switching e.g. lighting, or it may be
used to switch the live or live and neutral supply to the socket outlet.
2.3.2 Switches
These switches are not suitable for intermediate use in three way
(and above) systems. Wiring to the switches would normally be in 1
sq. mm or 1.5 sq. mm for heavier loads.
Use back box earthing terminals to maintain earth continuity where
required.