EVAL-ADM2914EBZ Analog Devices Inc, EVAL-ADM2914EBZ Datasheet - Page 13

• Manufacturer Part Number: EVAL-ADM2914EBZ
• Description: Voltage Supervisor Eval. Board
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADM2914EBZ

• Silicon Manufacturer: Analog Devices
• Application Sub Type: Voltage Supervisor
• Kit Application Type: Power Management
• Silicon Core Number: ADM2914
• Main Purpose: Power Management, Power Supply Supervisor/Tracker/Sequencer
• Embedded: No
• Utilized Ic / Part: ADM2914
• Primary Attributes: Voltage Detector & Supervisor
• Secondary Attributes: Open-Drain Output
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

OV LATCH (ADM2914-1)
If an overvoltage condition occurs when the LATCH pin is
pulled low, the OV pin latches low. Pulling LATCH high clears
the latch. If an OV condition clears while LATCH is high, the
latch is bypassed and the OV pin behaves in the same way as the
UV pin, with an identical timeout period. If the LATCH pin is
pulled low while the timeout period is active, the OV pin
latches low, as in normal operation.
Rev. B | Page 13 of 16
DISABLE (ADM2914-2)
Pulling the DIS pin high disables both the UV and OV outputs,
and forces both outputs to remain weakly pulled high, regard-
less of any faults that are detected at the inputs. If a UVLO
condition is detected, the UV output is asserted and pulls low;
however, the timeout function is bypassed. As soon as the
UVLO condition clears, the UV output pulls high. To guarantee
normal operation when the pin is left unconnected, DIS has a
weak 2 μA internal pull-down current.
ADM2914