XDS510 USB JTAG EMULATOR Spectrum Digital Inc, XDS510 USB JTAG EMULATOR Datasheet - Page 4

• Manufacturer Part Number: XDS510 USB JTAG EMULATOR
• Description: USB JTAG Emulator
• Manufacturer: Spectrum Digital Inc

Specifications of XDS510 USB JTAG EMULATOR

• Ic Product Type: In-Circuit Emulator / Programmer
• Kit Contents: Emulator, USB Cable, CD-ROM With Drivers, Setup Instructions, Warranty Registration Card
• Core Architecture: C2000
• Core Sub-architecture: C2000

XDS510USB Hardware Revision B
Spectrum Digital will migrate the XDS510USB emulator to
revision B in July of 2005. Revision B is an emulation
processor upgrade. As a side effect users must upgrade
to CCS emulation driver release 2.21.00 or higher with
revision B XDS510USB to ensure full compatibility.
Emulation driver version 2.21.00 and higher fully support
both revision A and B of the XDS510USB emulator.
XDS510USB revision B is easily identified by (B) in the
lower left corner of the product label.
If you cannot visually determine if you have a Rev A or
Rev B XDS510USB emulator then you can use the
SdConfig utility to determine the version.
In SdConfig do: "Configuration->Ports Available-
>Printer,USB"
Results for Rev A XDS510USB
** Checking for available USB ports
The last 4 digits of "0422" indicate a Rev A emulation
processor.
Results for Rev B XDS510USB
** Checking for available USB ports
The last 4 digits of "2522" indicate a Rev B emulation
processor.
12502 Exchange Dr., Ste 440, Stafford, TX. 77477
$$ XDS510USB connected on:
$$ EmuPortAddr=0x510
$$ EmuSerialNumber=S071537725020422
$$ XDS510USB connected on:
$$ EmuPortAddr=0x510
$$ EmuSerialNumber=S064407522112522
T:281.494.4505, F:281.494.5310
506186-4001B
There is a possibility that you have an emulation driver
release between 2.20.00 and 2.21.00 that supports the
XDS510USB revision B emulator. In that case you can
continue using your emulation driver with the XDS510USB
revision B. If your emulation driver does NOT support
XDS510USB revision B then when you start CCS you
should get an error dialog similar to the screen below.
This indicates that the emulation driver software is
unaware of the underlying emulation controller version. If
this occurs and you have verified your emulator is a
revision B then you will have to upgrade your emulation
drivers to 2.21.00 or higher.
www.spectrumdigital.com
Page 4 of 4