EM-LPC1700-68 EMBEST, EM-LPC1700-68 Datasheet - Page 4

• Manufacturer Part Number: EM-LPC1700-68
• Description: NXP LPC1768 Evaluation Board
• Manufacturer: EMBEST

Specifications of EM-LPC1700-68

• Silicon Manufacturer: NXP
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: Cortex Debug, Mini SD Card, USB Device/Host/OTG Interface
• Silicon Core Number: LPC17xx
• Silicon Family Name: LPC17xx

6. Power Supply
7. Test this board
(1) Start the PC
(2) Connect relevant devices
(3) When the board electrifies, press the Reset button on the board, then watch the
phenomenon displaying on the LCD screen
(4) Start the hyperterminal on the PC, press the Reset button on the board again, will you
see the phenomenon displaying on the hyperterminal, and then run relevant programs
according to the instructions refered on the hyperterminal.
8. What is in the CD-ROM?
(1) Documents -- user manual, data sheet and the other development document.
(2) Images -- image files for this product.
(3) Software -- software programs or this product.
(4) Tools -- the utilities tools and software.
LPC1768 ARM-M3 board supports two power supply modes; you can select one of these
two power supply modes below through JP12 configuration.
(1) Supply 5V DC through power jack (JP11) on the board.
(2) Supply power through USB connecter (CON1) on the board, the current should be less
than 500mA
Connect COM1 interface of the board to the COM interface of the PC by using a serial
port cable for the information display and input;
Connect the PC’s USB port to the USB port on board by using a USB cable for USB
communication and power supply; the power LED lights when power is applied to the
board.
www.embedinfo.com/en
4/4