DATAMAN-448PRO+ DATAMAN, DATAMAN-448PRO+ Datasheet - Page 2

• Manufacturer Part Number: DATAMAN-448PRO+
• Description: 448Pro+ Gang ISP Production Programmer
• Manufacturer: DATAMAN

Specifications of DATAMAN-448PRO+

• Ic Product Type: Programmer, Universal
• No. Of Devices Supported: 32000
• Features: Programmer, Cables, ESD Strap, Manual Software, Case
• Kit Contents: Gang Programmer, USB Cable, ISP Cable, User Manual, Software, Transport Case

Base Unit (DAC)
• USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
• On-board intelligence: powerful microprocessor and FPGA based state machine
• Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
• VCCP range 0..8V/1A
• VPP1, VPP2 range 0..26V/1A
• Selftest capability
ZIF Socket Pindriver
• 48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices
• Pindrivers: 4 x 48 universal
• VCCP/VPP1/VPP2 can be connected to each pin
• Perfect ground for each pin
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver
• Analog pindriver output level selectable from 1.8 V up to 26V
• Current limitation, overcurrent shutdown, power failure shutdown
• ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
• Continuity test: each pin is tested before every programming operation
ISP Connector
• 20-pin male type with missinsertion lock
• 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable
• 1x VCCP voltage (range 2V..7V/100mA), can be applied to pins 1, 3
• Programmed chip voltage (VCCP) with both source/sink capability and
• 1x VPP voltage (range 2V..25V/50mA), can be applied to pins 2,3,4,6,8,10
• Target system supply voltage (range 2V..6V/250mA)
• ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV
Software:
User Interface
Production Mode Control
• This part of the software is focused to the easy monitoring of high-volume
• Operator-friendly control software combines many powerful functions with
• Project files are used to control the 448Pro+ multiprogrammer. The project
• Each chip may be programmed with different data such as serial number,
IN THE UK…
Dataman Programmers Ltd.
Station Road, Maiden Newton
Dorset DT2 0AE, UK
Tel [phone]
Fax [phone]
up to 48-pin
pins
from 1.8V up to 5V to handle all (including low-voltage) devices
voltage sense
contact)
production operations.
ease of use. Graphic user interface provides an overview of important
information, reducing the burden on the operator with unnecessary details.
files contain user data, chip programming setup, chip configuration, auto
programming command sequence, etc. This helps minimize operator error as
the project file is normally created and proofed by engineer and passed to
the operator. The optional protected mode can be set avoiding unwanted
changes to the project file.
configuration and calibration information.
IN THE US…
Dataman Inc.
215 East Michigan Avenue
Orange City, Florida 32763 USA
Tel [phone]
Fax [phone]
Engineering Mode Control
• This part of the software is focused to the quick and easy preparation of the
• Each programming module is driven by an easy-to-use control program with
• Standard device-related commands (read, blank check, program, verify, erase)
• All known data formats are supported. Automatic file format detection and
• The rich-featured auto-increment function enables one to assign individual
• The software provides extensive information about programmable devices
The Dataman 448Pro+ supports over 32,000 of the most popular devices in use
today - with future devices being added monthly. Dataman 448Pro+ coverage
includes the following device types:
Programmer (ZIF Socket)
1-Wire E(E)PROM, BI-PROM, Configuration (EE)PROM, CPAL, EEPROM, EPROM,
EPLD, Flash, Flash EPROM, FPGA, GAL, MACH, Microcontrollers, MROM, NV RAM,
PAL, PEEL, PLD, PROM, Serial E(E)PROM
Programmer (ISP Connector)
Microcontrollers, PLD, Serial E(E)PROM
Package Includes:
• Dataman 448Pro+ Universal Gang Production Programmer
• Moulded USB Cable
• Diagnostic POD for ZIF socket selftest of the programmer (x1)
• Diagnostic POD for ISP connector selftest of the programmer (x1)
• ISP cable (x4)
• Anti-dust cover for ZIF socket (x4)
• ESD wrist strap with cord and banana plug
• User manual
• Software
• Transport case
• Optional range of adapters and socket converters also available
Warranty and Support:
• 30 day money back guarantee* - If you don't like it, send it back
• Three year guarantee - Three years parts and labour warranty, on the
• Life-Time Technical Support - 448Pro+ technical support is available free via
• Life-Time Software Updates - 448Pro+ software updates are available free
*Applies to orders from UK/US office only
Available from…
project file for usage in the production mode control software.
pull-down menus, hot keys and on-line help. Selecting of device is performed
by its class, by manufacturer or simply by typing a fragment of vendor name
and/or part number.
are enhanced by test functions (insertion test, signature-byte check) and
additional special functions (autoincrement, production mode -
programming starts immediately once chip inserted into socket).
conversion during loading of file. Jam file (JEDEC standard JESD-71) and VME
file compatible.
serial numbers to each programmed device - or simply increments a serial
number, or the function enables one to read serial numbers or any
programmed device identification signatures from a file.
including detailed drawings of all available packages. The software also
provides explanations of chip labelling (prefixes and suffixes) for each of the
supported chips.
Dimensions: 361x234x56 mm (14.2x9.2x2.2 inches)
Weight: 3.5kg (7.72 lb)
Operating voltage: 100-240V AC
Power consumption: max. 60W active
448Pro+ universal gang programmer.
our website and telephone helpdesk for life
via our website for life
www.dataman.com