500-702 MEGA, 500-702 Datasheet - Page 5

• Manufacturer Part Number: 500-702
• Description: SPRAY PROCESSOR, ROTA-SPRAY
• Manufacturer: MEGA
• Type: Processing Equipmentr

Specifications of 500-702

• External Height: 650mm
• External Width: 475mm
• Svhc: No SVHC (15-Dec-2010)
• External Depth: 500mm
• External Length / Height: 650mm
• Heavy Product: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Cleaning
Always remove any drips or splashes of processing chemistry when they occur with a damp
cloth or sponge. Never let them dry.
The outside of the plastic case should be kept clean with non abrasive cleaner. Any Ferric
Chloride staining can be removed with Mega’s Ferric Chloride Stain Remover (600-039).
When spent chemistry is removed, always wash the unit through thoroughly with water
before adding new chemistry. If Ferric chloride has been used, the inside of the machine
can be cleaned with a 5 litre solution of Ferric Chloride Stain Remover (600-039). Ensure
this is mixed outside the machine. Running the Rota-Spray with this solution will clean all
the spray chamber and etching column. Avoid wiping inside the chambers with anything
that will leave any debris i.e. paper towels, etc., as this will eventually get into the spray
tube and block the spray holes.
Electrical Safety Notice
CONNECTIONS TO MAINS ELECTRICAL SUPPLY
This equipment is designed to safety class 1
Before connecting this equipment to the mains electricity supply, examine the information on the apparatus rating label.
Ensure that the mains supply is single phase alternating current (a.c.) of the stated frequency (Hz), with neutral nominally at
earth potential.
Check the supply voltage is within the stated range.
The equipment rating label states the value of the fuse fitted to the
apparatus itself. Ensure that the plug or supply circuit is fitted with an appropriate fuse of higher value.
WARNING THIS APPARATUS MUST BE EARTHED.
The wires in the mains lead are coloured in accordance with the following code:
Green/Yellow
Blue
Brown
If a moulded fused plug is not fitted connect the wires to a non-reversible 3 pin plug as follows:-
Green/Yellow wire to terminal marked:
E (earth) or G (ground) or coloured Green or coloured Green/Yellow.
Blue wire to terminal marked:
N (neutral) or Common or coloured blue.
Brown wire to terminal marked:
1 AMP POWER SOCKET:
fitted under the control panel. This is only utilised when an external pump
is fitted for the spray wash chamber. The spray wash switch controls power
to the socket. The socket is rated at 1 AMP maximum.
NO SERVICING OR MAINTENANCE SHOULD BE CARRIED OUT UNTIL
THE UNIT HAS BEEN SWITCHED OFF AND ISOLATED FROM THE
MAINS ELECTRICITY SUPPLY.
Any spare parts which may be required, are supplied on the understanding
that the replacement of these requiring the exposure of live electrical
connections will be undertaken by an electrically qualified person.
L (live) or Phase or coloured Brown.
- Earth
- Live
- Neutral (N)
(E)
(L)
Please note: There is an IEC chassis socket
MEGA ELECTRONICS LTD.,
Mega House, Grip Industrial Estate, Linton, Cambridge, England, CB21 4XN
Tel: [phone] Fax: [phone]
email: [e-mail]
Never use any solvents to clean the unit.
web: www.megauk.com