SK-TSC-1125S Fujitsu, SK-TSC-1125S Datasheet - Page 5

• Manufacturer Part Number: SK-TSC-1125S
• Description: KIT, STARTER, TOUCH CNTRL, FMA1125
• Manufacturer: Fujitsu
• Type: Starter Kitr

Specifications of SK-TSC-1125S

• Mcu Supported Families: FMA1125
• Tool / Board Applications: Touch Sensor Controller
• Silicon Manufacturer: Fujitsu
• Kit Contents: SK-TSC-1125S-TB Touch Board, ADA-16FX-TSC-LCD, 10-pin Ribbon Cable, 3x FMA1125DC-24S Sample
• Features: Connector For Standard Parallel LC Display, 10-pin
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1 Overview
1.1 Abstract
The SK-TSC-1125S Starter Kit allows easy evaluation of the FMA1125 Touch Sensor
Controller. It consists of the following parts:
A demo firmware allows direct evaluation of the touch sensor, and provides various
commands to tune the TSC parameters using a command-line interface and a terminal
program. The newest version of the demo firmware, the SK-Wizard (the recommended
terminal program) and additional information can be downloaded from the TSC product
page:
This manual will describe the behaviour when used with the above demo firmware where
needed (e.g. tuning with command line interface). Of course the Starter Kit itself can also be
used with different host software and / or hardware combinations.
© Fujitsu Microelectronics Europe GmbH
This evaluation system must only be used for test applications
•
•
•
•
•
•
1x SK-TSC-1125S-TB touch board with FMA1125 TSC
1x ADA-16FX-TSC-LCD
1x 10-pin ribbon cable
3x FMA1125DC-24S Sample
In order to use the free example software, an SK-16FX-EUROSCOPE Starter Kit
is required as host system, which has to be ordered separately. In this case,
the included ADA-16FX-TSC-LCD and ribbon cable can be used to connect
both PCBs.
The SK-TSC-1125S-SB itself can alternatively be connected to any suitable
host PCB using appropriate connections.
http://www.fujitsu.com/emea/services/microelectronics/tsc/
in an evaluation laboratory environment!
SK-TSC-1125S User Guide
- 5 -