SK-TSC-1127-SB Fujitsu, SK-TSC-1127-SB Datasheet - Page 12

• Manufacturer Part Number: SK-TSC-1127-SB
• Description: KIT, STARTER, TOUCH CNTRL, FMA1127
• Manufacturer: Fujitsu
• Type: Starter Kitr

Specifications of SK-TSC-1127-SB

• Mcu Supported Families: FMA1127
• Tool / Board Applications: Touch Sensor Controller
• Silicon Manufacturer: Fujitsu
• Kit Contents: SK-TSC-1127S-SB Touch Board, ADA-16FX-TSC-LCD, 10-pin Ribbon Cable, 3x FMA1127DC-30S Sample
• Features: 10-pin Connector For I2C And Interrupt Signals, Pin
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4.2 ADA-16FX-TSC-LCD
The contrast for the (optional) LC display can be adjusted using RP1.
A resistor suitable for the LCD backlight can be soldered on the PCB (R4 for 0805, R5 for
0805 or 1206). JP5 should only be closed if the LCD itself is equipped with a suitable series
resistor for the backlight.
2.4.3 SK-16FX-EUROSCOPE
The TSC starter kit uses the default jumper settings of the SK-16FX-EUROSCOPE. Please
refer to the user manual of the SK-16FX-EUROSCOPE for configuration options.
Note:
The TSC can operate at 3.3V as well as 5V (default), but most standard LC displays will only
operate at 5V.
(LCD Backlight)
(SDA pull-up)
(SCL pull-up)
(TSC Reset)
Jumper
(SDA)
(SCL)
JP2
JP3
JP3
JP4
JP5
JP6
Setting
Closed
Closed
Closed
Closed
Closed
Closed
Open
Open
Open
Open
Open
Open
SK-TSC-1127-SB User Guide
Description
I2C SCL line not connected to Pull-up resistor
I2C SCL line connected to Pull-up resistor
I2C SDA line not connected to Pull-up resistor
I2C SDA line connected to Pull-up resistor
TSC Reset Pin (X1 Pin 8) not connected
TSC Reset Pin connected to MCU pin 17 (P04_3)
TSC SDA (X1 Pin 2) not connected to MCU
TSC SDA connected to MCU
LCD Backlight not connected or via R4/R5
LCD Backlight directly connected to VCC
TSC SCL (X1 Pin 1) not connected to MCU
TSC SCL connected to MCU
- 12 -
© Fujitsu Microelectronics Europe GmbH