20269 Loctite, 20269 Datasheet - Page 2

• Manufacturer Part Number: 20269
• Description: CYANOACRYLATE ADHESIVE, BOTTLE, 20G
• Manufacturer: Loctite
• Series: 4014r

Specifications of 20269

• Adhesive Type: Cyanoacrylate
• Adhesive Applications: Bonding - Medical Devices
• Color: Clear
• Dispensing Method: Bottle
• Weight: 20g
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

TYPICAL ENVIRONMENTAL RESISTANCE
Humidity Resistance
38°C - 85% Relative Humidity
Effects of Sterilization
In general, products similiar in composition to LOCTITE
4014™ subjected to standard sterilization methods, such as
EtO and Gamma Radiation (25 to 50 kiloGrays cumulative)
show excellent bond strength retention. LOCTITE
maintains bond strength after 1 cycle of steam autoclave. It is
recommended that customers test specific parts after
subjecting them to the perferred sterilization method. Consult
with Loctite
see more than 3 sterilization cycles.
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidizing materials
For safe handling information on this product, consult the
Material Safety Data Sheet (MSDS).
Directions for use:
Loctite Material Specification
LMS dated October-11, 2002. Test reports for each batch are
available for the indicated properties. LMS test reports include
selected QC test parameters considered appropriate to
specifications for customer use. Additionally, comprehensive
controls are in place to assure product quality and
consistency. Special customer specification requirements may
be coordinated through Henkel Quality.
Henkel Americas
+860.571.5100
Adhesive Properties
Lap Shear Strength, ISO 4587, N/mm²:
1. For best performance bond surfaces should be clean and
2. This product performs best in thin bond gaps (0.05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup
* 1 - Control
* 2 - Aged 1 Week
* 3 - Aged 4 weeks
* 4 - Aged 8 weeks
Substrates
PVC to PVC
ABS to ABS
Polycarbonate to polycarbonate
Stainless Steel to PVC
Stainless Steel to ABS
Stainless Steel to Polycarbonate
Stainless Steel to Polyurethane
free from grease.
solvents, nitromethane or acetone.
For the most direct access to local sales and technical support visit: www.henkel.com/industrial
®
for a product recommendation if your device will
LMS
1.5
>8
>4
>8
>6
>4
>4
1*
>3.5
>6.5
1.4
>5
>6
>4
>4
2*
>5.5 >5.5
2.2
>5
>3
>6
>5
>4
3*
®
+49.89.320800.1800
4014™
>2.5
>5.5
2.0
Henkel Europe
>5
>4
>2
4*
®
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or
greater than 8 °C can adversely affect product properties.
Material removed from containers may be contaminated during
use. Do not return product to the original container. Henkel
Corporation cannot assume responsibility for product which
has been contaminated or stored under conditions other than
those previously indicated. If additional information is required,
please contact your local Technical Service Center or
Customer Service Representative.
Conversions
(°C x 1.8) + 32 = °F
kV/mm x 25.4 = V/mil
mm / 25.4 = inches
µm / 25.4 = mil
N x 0.225 = lb
N/mm x 5.71 = lb/in
N/mm² x 145 = psi
MPa x 145 = psi
N·m x 8.851 = lb·in
N·m x 0.738 = lb·ft
N·mm x 0.142 = oz·in
mPa·s = cP
Note
The data contained herein are furnished for information only
and are believed to be reliable.
responsibility for the results obtained by others over whose
methods we have no control. It is the user's responsibility to
determine suitability for the user's purpose of any production
methods mentioned herein and to adopt such precautions as
may be advisable for the protection of property and of persons
against any hazards that may be involved in the handling and
use thereof. In light of the foregoing, Henkel Corporation
specifically disclaims all warranties expressed or implied,
including warranties of merchantability or fitness for a
particular purpose, arising from sale or use of Henkel
Corporation’s products. Henkel Corporation specifically
disclaims any liability for consequential or incidental
damages of any kind, including lost profits. The discussion
herein of various processes or compositions is not to be
interpreted as representation that they are free from
domination of patents owned by others or as a license under
any Henkel Corporation patents that may cover such
processes or compositions.
prospective user test his proposed application before repetitive
use, using this data as a guide. This product may be covered
by one or more United States or foreign patents or patent
applications.
Trademark usage
Except as otherwise noted, all trademarks in this document
are trademarks of Henkel Corporation in the U.S. and
elsewhere.
Patent and Trademark Office.
Reference 1.2
®
denotes a trademark registered in the U.S.
TDS LOCTITE
We recommend that each
®
4014™, February-2010
We cannot assume
Henkel Asia Pacific
+86.21.2891.8863