DP-270 CLEAR 1.7 FL OZ 3M, DP-270 CLEAR 1.7 FL OZ Datasheet - Page 5

• Manufacturer Part Number: DP-270 CLEAR 1.7 FL OZ
• Description: EPOXY 2 PART ADH CARTRIDGE 1.7FL.OZ
• Manufacturer: 3M
• Series: Scotch Weldr

Specifications of DP-270 CLEAR 1.7 FL OZ

• Adhesive Type: Epoxy - 2 Part
• Adhesive Applications: Potting / Bonding - Electronic Components
• Color: Clear
• Dispensing Method: Dual-Cartridge
• Volume: 1.7fl.oz. (US)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3M
Epoxy Potting Compound/Adhesive
DP270 Clear and Black
3M™ EPX™
Pneumatic Applicator
Delivery Rates
Handling/Curing
Information
™
Scotch-Weld
200 ml Applicator – Maximum Pressure 58 psi
50 ml Applicator – Maximum Pressure 50 psi
*Tests were run at a temperature of 70°F ± 2°F (21°C ± 1°C) and at maximum applicator pressure.
Directions for Use
1. For high strength structural bonds, paint, oxide films, oils, dust, mold release
2. These products consist of two parts.
Adhesive*
3M™ Scotch-Weld™ Epoxy Potting
Compound/Adhesive DP270 Black
Adhesive*
3M™ Scotch-Weld™ Epoxy Potting
Compound/Adhesive DP270 Clear
Scotch-Weld epoxy potting
compound/adhesive DP270 Black
For Bulk Containers
Mix thoroughly by weight or volume in the proportions specified in the typical
uncured properties section to obtain a uniform color.
agents and all other surface contaminants must be completely removed. However,
the amount of surface preparation directly depends on the required bond strength
and the environmental aging resistance desired by user. For specific surface
preparations on common substrates, see the section on surface preparation.
Mixing
For Duo-Pak Cartridges
Scotch-Weld epoxy potting compound/adhesive DP270 Clear and Black are
supplied in a dual syringe plastic duo-pak cartridge as part of the 3M™ EPX™
Applicator systems. To use, simply insert the duo-pak cartridge into the EPX
applicator and start the plunger into the cylinders using light pressure on the
trigger. Next, remove the duo-pak cartridge cap and expel a small amount of
adhesive to be sure both sides of the duo-pak cartridge are flowing evenly and
freely. If mixing of Part A and Part B is desired, attach the EPX applicator mixing
nozzle to the duo-pak cartridge and begin dispensing the adhesive. For hand
mixing, expel the desired amount of material and mix thoroughly to obtain a
uniform color.
™
- 5 -
6mm Nozzle
gms/minute
38.2
1/4 in. Nozzle
gms/minute
75.6
68.6
10mm Nozzle
gms/minute
148.8