BTM404-02 Laird Technologies, BTM404-02 Datasheet - Page 25

• Manufacturer Part Number: BTM404-02
• Description: MODULE, BLUETOOTH, BISM2 PA, 3.3V
• Manufacturer: Laird Technologies

Specifications of BTM404-02

• Compliance Standard: CE, FCC, IC, R, TTE
• Supply Voltage Range: 3.3V To 5V
• Physical Interfaces: UART
• Data Rate: 300Kbps
• Transmit Power: 65mW
• Receiving Signal Range: -87dBm
• Operating Temperature: RoHS Compliant
• Operating Temperature Range: -10°C To +85°C
• Rohs Compliant: Yes

12. Qualification
12.1
The following safety precautions must be observed during all phases of the operation, usage, service
or repair of any application incorporating this Module. Manufacturers of the RF equipment are advised
to convey the following safety information to users and operating personnel and to incorporate these
guidelines into all manuals supplied with the product. Failure to comply with these precautions
violates safety standards of design, manufacture and intended use of the product. EZURiO assumes
no liability for customer failure to comply with these precautions.
12.2
If the Bluetooth module is used in equipment that might be taken and operated on a commercial
flight, the following safety instructions, or similar warning should be added to the user manual.
“Switch off the Wireless device before boarding an aircraft. Make sure it cannot be switched on
inadvertently. The operation of wireless appliances in an aircraft is forbidden by many airlines to
prevent interference with communications systems.”
12.3
12.3.1
This device has been tested according to the Bluetooth Qualification program and approved as an
END product, with Bluetooth approval number BOxxx. END product approval means that integrators
do not need to perform any further Bluetooth approvals unless additional profiles are added within
their specific product. To meet the requirements of the Bluetooth SIG, this approval number must be
marked on the final equipment or referenced in the accompanying documentation.
The use of the Bluetooth logo on a product or any associated material is controlled by the Bluetooth
Brand Book. Usage is freely allowed for devices incorporating this END product module, so long as
the manufacturer is a member of the Bluetooth SIG. Membership of the Bluetooth SIG is free and
application can be made at www.bluetooth.org.
12.3.2
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
To inherit the modular approval, the antennas for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Co-location with other radio transmitting devices operating concurrently in the same band will require
additional testing and certification.
DSH_BTM404_0v5 BISM2 3V3 PA Data Sheet.DOC
Insulator
Stacking height
Insertion force
Withdrawal force 1st
Withdrawal force 50th
Maximum connection cycles
Bluetooth Qualification
FCC and Industry Canada Statements
Qualification Process
Safety Informat
Certificati
ons
Material PA , beige natural
3.0 mm ; 3.5 mm ; 4.0 mm ; 5.0 mm
21.8N
10N
10N
50
ion:
25
© 2007-8 EZURiO Ltd
www.EZURiO.com