FH12-10S-0.5SH(55) HRS (HIROSE), FH12-10S-0.5SH(55) Datasheet - Page 18
![FFC/FPC CONNECTOR, RECEPTACLE 10POS 1ROW](/photos/24/88/248850/4411505_sml.jpg)
FH12-10S-0.5SH(55)
Manufacturer Part Number
FH12-10S-0.5SH(55)
Description
FFC/FPC CONNECTOR, RECEPTACLE 10POS 1ROW
Manufacturer
HRS (HIROSE)
Datasheet
1.FH12-5S-1SH55.pdf
(20 pages)
Specifications of FH12-10S-0.5SH(55)
Gender
Receptacle
Pitch Spacing
0.5mm
No. Of Contacts
10
No. Of Rows
1
Contact Plating
Gold
Ffc/fpc Thickness
0.3mm
Connector Type
FFC / FPC
Contact Termination
Surface Mount Right Angle
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
FH12-10S-0.5SH(55)
Manufacturer:
HIRSOE
Quantity:
6 400
18
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Bottom Contact Type (common for 0.5mm/1mm Pitch)
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1.
Operation
Stiffener
6) Partial insertion of the FPC/FFC, offset insertion, and
7) When locking, handle the FPC/FFC so that a load
8) At the time of lock operation, application of force
diagonal insertion will result in an unfavorable engage-
ment of the lock lever in which the lock lever is raised.
To correct this, first remove the FPC/FFC and then
reinsert it. Forcing the lock will damage the connector.
is not applied to the FPC/FFC as would occur by
pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direction to
the rotational movement of the lock, an excessive
load will be applied and this will cause connector
damage.
such as that indicated by the arrows in the dia-
grams below will cause the lock lever to disengage.
When the lock lever has become disengaged,
please exchange the entire connector.
Precautions