FH28E-60S-0.5SH(05) HRS (HIROSE), FH28E-60S-0.5SH(05) Datasheet - Page 10

• Manufacturer Part Number: FH28E-60S-0.5SH(05)
• Description: FFC/FPC CONNECTOR, RECEPTACLE 60POS 1ROW
• Manufacturer: HRS (HIROSE)

Specifications of FH28E-60S-0.5SH(05)

• Gender: Receptacle
• Pitch Spacing: 0.5mm
• No. Of Contacts: 60
• No. Of Rows: 1
• Contact Plating: Gold
• Ffc/fpc Thickness: 0.3mm
• Connector Type: FFC / FPC
• Contact Termination: Surface Mount Right Angle
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10
FH28 Series 0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Operation and Precautions
1.FPC/FFC insertion procedure.
2.FPC/FFC removal
1
2
3
Connector installed on the board.
Lift up the actuator. Use thumb or index finger
Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
Rotate down the actuator until firmly closed. It is
critical that the inserted FPC/FFC is not moved and
remains fully inserted.
Fully open the actuator.
Carefully withdraw the FPC/FFC exercising caution
not to deform or damage it.
Operation
1
2
3
4
5
Do not force the actuator to open beyond its fully open
position. Do not use any type of tool to open the actuator.
Properly insert the FPC at the positioning part of the connector.
Locking the FPC while it is partially inserted, may cause lock
damage, disconnection of the FPC, or continuity fault.
Do not forcefully bend the FFC/FPC upward.
Consult FFC/FPC manufacturer for the
recommended bend radiuses.
For connectors with multiple contacts, such as 80
pos. rotate down the actuator pushing at both ends.
Application of excessive force to the inserted FPC/FFC may cause damage to
connector and may affect the reliability of electrical connection.
If specific application requires continuous or repeated pull or bend of the inserted
FPC/FFC, assure that the forces are NOT transmitted directly to the connector.
Precautions