FH12A-30S-0.5SH(55) HRS (HIROSE), FH12A-30S-0.5SH(55) Datasheet - Page 20

• Manufacturer Part Number: FH12A-30S-0.5SH(55)
• Description: FFC/FPC CONNECTOR, RECEPTACLE 30POS 1ROW
• Manufacturer: HRS (HIROSE)

Specifications of FH12A-30S-0.5SH(55)

• Gender: Receptacle
• Pitch Spacing: 0.5mm
• No. Of Contacts: 30
• No. Of Rows: 1
• Contact Plating: Gold
• Ffc/fpc Thickness: 0.3mm
• Connector Type: FFC / FPC
• Contact Termination: Surface Mount Right Angle
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

20
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (common for 0.5mm/1mm Pitch)
1. FPC/FFC Termination procedure.
1) Verify that the actuator is positioned upright. If the
2) Insert the FPC/FFC vertically in the connector slot
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Connector installed on the board.
actuator has rotated to the side, carefully rotate it
upright.
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
Rotate the actuator upward and withdraw the FPC/FFC.
Stiffener
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
Operation
®
Actuator upright
FPC/FFC conductive traces
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
1) Avoid forcing the actuator up or down without the
2) Do not insert the FPC/FFC diagonally.
Doing so will result in the corners of the FPC/FFC
catching on the contacts and will cause deforma-
tion of the contacts.
FPC/FFC inserted.
Precautions