DF19G-30S-1C(05) HRS (HIROSE), DF19G-30S-1C(05) Datasheet - Page 12

• Manufacturer Part Number: DF19G-30S-1C(05)
• Description: HOUSING, 1MM, 30WAY
• Manufacturer: HRS (HIROSE)

Specifications of DF19G-30S-1C(05)

• Connector Type: Wire-to-Board
• Contact Termination: Crimp
• Gender: Plug
• No. Of Contacts: 30
• No. Of Rows: 1
• Pitch Spacing: 1mm
• Contact Resistance: 30mohm
• Insulation Resistance: 500Mohm
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

B264
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF19 Series●1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors
B
Use recommendations
1. Recommendedtemperature profile
2. Manual soldering
3. Screen thickness
4. Board warpage
5. Cleaning conditions
6. Termination conditions
7. Precautions
8. Precautions
Manual soldering: 290±10ç for 3 seconds
0.15mm
Maximum of 0.03mm at the connector center, with both ends of the connector as
reference points.
Refer to “Nylon Connector Use Handbook.”
Refer to “Nylon Connector Use Handbook.”
■
Refer to “Nylon Connector Use Handbook.”
Do not twist when mating/un-mating.
Temperature(ç)
Note 1: Up to 2 cycles of Reflow soldering are possible under the same
Note 2: The temperature profile indicates the board surface temperature at
Note 3: The product can be used without trouble though the surface of a
conditions, provided that there is a return to normal temperature
between the first and second cycle.
the point of contacts with the connector terminals.
grounding plate might discolor.
200ç
150ç
100ç
250ç
50ç
30
50
Preheating
60 to 120(S)
100
180
220
150
250ç
220ç min 60(s)max
soldering
10(s)max
200
TIME(S)