FD14-250C 3M, FD14-250C Datasheet - Page 2

• Manufacturer Part Number: FD14-250C
• Description: TERMINAL, FEMALE DISCONNECT 0.25IN CRIMP
• Manufacturer: 3M
• Series: Highlandr

Specifications of FD14-250C

• Connector Type: Female Disconnect
• Termination Method: Crimp
• Stud/tab Size: 0.25 X 0.032"
• Wire Size (awg): 16-14
• Contact Material: Brass
• Contact Plating: Tin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Engineering Specification
Crimp-Type Female Disconnect Terminals shall, elec-
trically and mechanically, connect permanently to a
prestripped end of a stranded copper wire: and have a
tongue portion with fingers which grip a Male
Disconnect in a separable, reusable manner, forming a
Quick Connect Wiring Termination.
The connector line shall offer tongue variations (sized
to grip Male Tabs: 0.187˝ x .0.250˝)and barrel varia-
tions in construction (non-insulated, nylon insulated
with insulation grip, etc.). The tongue portion shall be
marked with the wire range and manufacturer’s sym-
bol ( ).
3M is a trademark of 3M.
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asserted.
The Non-Insulated 0.250˝ Female Disconnect shall be
tin plated 0.020˝ thick brass with a tongue for grip-
ping a 0.250˝ Male Tab of 0.032˝ thickness and a
butted seam barrel sized for a specified (AWG) wire
range (22-18, 16-14).
Insulated connectors shall be UL Listed and CSA
Certified for 600 V building wire: 1000 V signs or
lighting fixtures (luminaires).
Female Disconnects shall be suitable for field or fac-
tory wiring, with a UL Recognized strain relief
required
.
© 3M 2002 78-8126-0642-0-A
Litho in USA.