BFC238560472 Vishay, BFC238560472 Datasheet - Page 6

• Manufacturer Part Number: BFC238560472
• Description: CAPACITOR, MKP, 4.7NF, 2000V, 5%
• Manufacturer: Vishay
• Series: MKP 385r

Specifications of BFC238560472

• Capacitor Dielectric Type: Polypropylene
• Capacitance Tolerance: ± 5%
• Voltage Rating: 2000V
• Life Time @ Temperature: 2000 Hours @ 105°C
• Capacitor Case: RoHS Compliant
• Capacitance: 0.0047µF

MKP 385
Vishay BCcomponents
MOUNTING
Normal use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board. The capacitors shall be mechanically fixed by the leads.
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
•
• Product height with seating plane as given by “IEC 60717” as reference: h
Storage Temperature
•
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
164
Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
Storage temperature: T
stg
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
AC and Pulse Metallized Polypropylene Film Capacitors
Eccentricity
For technical questions, contact: [e-mail]
I
max.
MKP Radial Potted Type
= I + 0.3 mm
b
max.
max.
= b + 0.3 mm
≤ h + 0.3 mm.
Document Number: 28152
Revision: 13-Oct-08