40L3151 GENTEQ, 40L3151 Datasheet - Page 6
![CAPACITOR PP FILM 1.5UF, 400V, AXIAL](/photos/25/79/257985/4544679_sml.jpg)
40L3151
Manufacturer Part Number
40L3151
Description
CAPACITOR PP FILM 1.5UF, 400V, AXIAL
Manufacturer
GENTEQ
Specifications of 40L3151
Capacitor Dielectric Type
Polypropylene
Capacitance Tolerance
± 10%
Voltage Rating
400VDC
Esr
0.009ohm
Life Time @ Temperature
1000 Hours @ 105°C
No. Of Pins
2
Capacitance
1.5µF
Material, Element
Polypropylene Metallized
Termination
Axial
Tolerance
±10 %
Voltage, Rating
400 VDC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
02
The 40L Series are high-performance dry, axial-leaded capacitors designed specifically for demanding
electronic applications. They are commonly used in input and output filters and for DC blocking in high-
frequency switch-mode power supplies. The low electrical losses of the polypropylene film dielectric
combined with the enhanced current carrying ability of the special “graded” metallized electrodes
results in outstanding performance. If there are any questions regarding the correct application of these
products, please contact your RBC sales representative.
SPECIFICATIONS:
Available Capacitance Range:
Capacitance Tolerance:
Capacitance Variation with Temperature:
Rated Voltage:
Rated Current:
Equivalent Series Resistance (ESR):
Capacitance:
Operating Temperature:
Storage Temperature:
Dissipation Factor:
Insulation Resistance:
Leads:
Package Construction:
GTC
005
– 02 / 10
(40L) Snubber & High-Current DC
www.genteqcapacitors.com
±3% from -55ºC to +105ºC
Voltage.
RMS current in amperes.
measured at 25ºC in the range of 20-100,000Hz.
Values shown in the table at 25ºC, 1KHz.
1-minute energization at 25ºC.
20 or 18 AWG electroplated solid copper wire leads.
(gauge tolerance: ±0.001 in.)
compound
0.47 to 6.8µF
±10%
See Rating Tables. Rating is the Maximum Peak DC
See Rating Tables. The rating is the Maximum allowable
See Rating Table. The rating is the maximum value
-55ºC to +105ºC
-55ºC to +105ºC
0.1% maximum at 25ºC, 1KHz
200,000Megohms - µF minimum at 100 VDC after
Fire retardant tape wrap with polyurethane potting
400 and 600 Volts Peak