41L6501 GENTEQ, 41L6501 Datasheet - Page 6

• Manufacturer Part Number: 41L6501
• Description: CAPACITOR PP FILM 5UF, 600V, AXIAL
• Manufacturer: GENTEQ

Specifications of 41L6501

• Capacitor Dielectric Type: Polypropylene
• Capacitance Tolerance: ± 5%
• Voltage Rating: 600VDC
• Esr: 0.0022ohm
• Capacitor Mounting: Through Hole
• Termination Type: Axial Leaded
• Capacitance: 5µF
• Brand/series: 41L Series
• Diameter: 28.5 mm (Max.)
• Dissipation Factor: 5x10E-4 @ 1 kHz and 25 °C
• Esr, Maximum: 2.2 Milliohms (Typ.) @ 100 kHz
• Esr, Test Condition: @ 100 kHz
• Length: 42 mm +⁄- 2 mm
• Length, Lead: 40 mm +⁄- 5 mm
• Material, Element: Polypropylene Metallized
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -40 °C
• Termination: Axial
• Tolerance: ±5 %
• Voltage, Rating: 600 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

02
The 40L Series are high-performance dry, axial-leaded capacitors designed specifically for demanding
electronic applications. They are commonly used in input and output filters and for DC blocking in high-
frequency switch-mode power supplies. The low electrical losses of the polypropylene film dielectric
combined with the enhanced current carrying ability of the special “graded” metallized electrodes
results in outstanding performance. If there are any questions regarding the correct application of these
products, please contact your RBC sales representative.
SPECIFICATIONS:
Available Capacitance Range:
Capacitance Tolerance:
Capacitance Variation with Temperature:
Rated Voltage:
Rated Current:
Equivalent Series Resistance (ESR):
Capacitance:
Operating Temperature:
Storage Temperature:
Dissipation Factor:
Insulation Resistance:
Leads:
Package Construction:
GTC
005
– 02 / 10
(40L) Snubber & High-Current DC
www.genteqcapacitors.com
±3% from -55ºC to +105ºC
Voltage.
RMS current in amperes.
measured at 25ºC in the range of 20-100,000Hz.
Values shown in the table at 25ºC, 1KHz.
1-minute energization at 25ºC.
20 or 18 AWG electroplated solid copper wire leads.
(gauge tolerance: ±0.001 in.)
compound
0.47 to 6.8µF
±10%
See Rating Tables. Rating is the Maximum Peak DC
See Rating Tables. The rating is the Maximum allowable
See Rating Table. The rating is the maximum value
-55ºC to +105ºC
-55ºC to +105ºC
0.1% maximum at 25ºC, 1KHz
200,000Megohms - µF minimum at 100 VDC after
Fire retardant tape wrap with polyurethane potting
400 and 600 Volts Peak