2518121217Y6 Fair-Rite, 2518121217Y6 Datasheet - Page 13

• Manufacturer Part Number: 2518121217Y6
• Description: FERRITE BEAD, SMD, 20mOHM, 6A
• Manufacturer: Fair-Rite

Specifications of 2518121217Y6

• Impedance: 120ohm
• Dc Resistance Max: 0.02ohm
• Dc Current Rating: 6A
• Ferrite Mounting: SMD
• Ferrite Case Style: 1812
• Peak Reflow Compatible (260 C): Yes
• Leaded Process Compatible: No
• Shielding: Unshielded
• Test Frequency: 100 MHz
• Tolerance: 25 %
• Maximum Dc Current: 6000 mAmps
• Maximum Dc Resistance: 0.02 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 1812 (4532 metric)
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

• Split round cable suppression cores are controlled for impedances only. The impedances listed are typical values. Minimum impedance
• Single turn impedance tests for the 31, 43, 44 and 46 material are performed on the 4193A Vector Impedance Analyzer. The 61 material
• Over-molding, heat shrink tubing or any other suitable mechanical arrangement can be utilized to clamp split cable cores together. Many
• Many of the split round cable suppression cores have round cable core equivalents. See section Round Cable EMI Suppression Cores on
• Performance curves of all listed split round cable suppression cores are compiled on the Fair-Rite CD-ROM.
• The "Expanded Cable and Suppressor Kit" (part number 0199000005) contains a selection of these split round cable suppression cores.
• Explanation of Part Numbers: Digits 1&2 = product class and 3&4 material grade.
F a i r- Rite Products Co r p.
Phone:
Split
parts are tested on the 4191A RF Impedance Analyzer. Cores are tested with the shortest practical wire length.
of these split round cable cores can be supplied as Round Snap-It assemblies. The first two digits change from 26 to 04. See pages
75 - 78 for the listing of Round Cable Snap-Its.
pages 70-74.
For details see page 67.
Split round cable suppression cores can be used on cables and wire harnesses with diameters ranging from 2.5
mm (.100”) to 25.4 mm (1.000”).These cores are available in three ferrite material grades to attenuate conducted
differential and common-mode EMI from 1 MHz into the GHz region.
values are specified for the + marked frequencies. The minimum guaranteed impedance is the listed impedance less 20%.
(888) FAIR RITE / [phone] • FAX: (888) FERRITE / [phone]
[phone]
Figure 1
Round Cable EMI Suppression Cores
(888) 337 -7483
Figure 3
Listed by frequency and in ascending order of cable diameter.
• www.fair-rite.com
• E-Mail: [e-mail]
PO Box J, One Commercial Row, Wallkill, NY 12589-0288
Figure 2