0603WGFE240KIT MULTICOMP, 0603WGFE240KIT Datasheet - Page 6

RESISTOR KIT, THICK FILM CHIP

0603WGFE240KIT

Manufacturer Part Number
0603WGFE240KIT
Description
RESISTOR KIT, THICK FILM CHIP
Manufacturer
MULTICOMP
Series
MCr
Datasheet

Specifications of 0603WGFE240KIT

Kit Contents
E24
Range Of Resistor Values
10ohm To 1Mohm
Resistance Tolerance
± 1%
Voltage Rating Vdc
50V
Power Rating
62.5mW
Operating Temperature Range
-55°C To +125°C
Package / Case
0603
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Characteristics
Temperature
Short time
overload
Insulation
resistance
Dielectric
withstanding
voltage
Terminal bending
Temperature
cycling
Load life in
humidity
Load Life
7. Performance specification :
coefficient
10Ω 100Ω
101Ω 1MΩ
Resistance change rate is
± (1.0% + 0.1Ω) Max.
1,000 MΩ or more
No evidence of flashover
mechanical damage, arcing or
insulation break down
± (1.0% + 0.05Ω) Max.
± (0.5% + 0.05Ω) Max.
Resistance change rate is
± (1.0% + 0.1Ω) Max.
Resistance change rate is
± (1.0% + 0.1Ω) Max.
± 200 PPM/
± 100 PPM/
Limits
Chip Kit Resistors (Lead Free)
Page 4
5.2 Natural resistance change per temp.
R
R
5.5 Permanent resistance change after the
5.6 Apply 500V DC between protective coating
and termination for 1 min, then measure
5.7 Apply 500V AC between protective coating
and termination for 1 minute
6.1.4 Twist of Test Board :
Y/X = 5/90 mm for 10 seconds
7.4 Resistance change after continuous
7.9 Resistance change after 1,000 hours
(1.5 hours "on", 0.5 hour "off" ) at RCWV
in a humidity chamber controlled at
40 ± 2 and 90 to 95 % relative humidity
7.10 Permanent resistance change after 1,000 hours
operating at RCWV, with duty cycle of
(1.5 hours"on", 0.5 hour"off") at 70
degree centigrade.
application of a potential of 2.5 times RCWV
for 5 seconds
5 cycles for duty cycle specified below :
1
2
: Resistance value at room temperature (t1)
: Resistance value at room temp. plus 100
Step
R
1
2
3
4
R
1
(t
2
-R
2
-t
1
1
)
Temperature
-55 ± 3
Room temp.
+125 ± 2
Room temp.
x 10
( JIS C 5201-1 )
6
Test Methods
(PPM/ )
2005/7/1--Version: 1
± 2 ambient
30 mins
10 15 mins
30 mins
10 15 mins
Time
(t2)