B57620C5103J62 EPCOS Inc, B57620C5103J62 Datasheet - Page 17

• Manufacturer Part Number: B57620C5103J62
• Description: 0805 10K J62 B-3730
• Manufacturer: EPCOS Inc

Specifications of B57620C5103J62

• Thermistor Type: NTC
• Resistance: 10kohm
• Thermistor Tolerance: ± 5%
• Beta Value (k): 3730K
• Thermistor Case Style: 0805
• No. Of Pins: 2

Cautions and warnings
General
See "Important notes".
Storage
Handling
Soldering
Please read Cautions and warnings and
Important notes at the end of this document.
Temperature measurement and compensation
SMD NTC thermistors, case size 0805 (2012)
Store thermistors only in original packaging. Do not open the package prior to storage.
Storage conditions in original packaging: storage temperature
humidity 75% annual mean, <95% maximum 30 days per annum, dew precipitation is
inadmissible.
Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the
packing material may be deformed or components may stick together, causing problems during
mounting.
Avoid contamination of thermistor surface during storage, handling and processing.
Avoid storage of thermistors in harmful environments like corrosive gases (SO
Use the components as soon as possible after opening the factory seals, i.e. the
polyvinyl-sealed packages.
Solder SMD NTC thermistors with nickel barrier termination within 12 months after shipment
from EPCOS.
NTC thermistors must not be dropped. Chip-offs or any other damage must not be caused
during handling of NTCs.
Do not touch components with bare hands. Gloves are recommended.
Avoid contamination of thermistor surface during handling.
Use resin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Page 17 of 21
25 C ... +45 C, relative
B574**V2/ B57620C5
x
, Cl etc).