C1005X7S2A152M TDK Corporation, C1005X7S2A152M Datasheet - Page 22

• Manufacturer Part Number: C1005X7S2A152M
• Description: CHIP CAPACITOR
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C1005X7S2A152M

• Rohs Compliant: YES
• Capacitance: 1500pF
• Voltage - Rated: 100V
• Tolerance: ±20%
• Temperature Coefficient: X7S
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Package / Case: 0402 (1005 Metric)
• Size / Dimension: 0.039" L x 0.020" W (1.00mm x 0.50mm)
• Thickness: 0.50mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 445-6021-2

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — Mid Voltage Application // Version A11
No.
16
17
*As for the initial measurement of capacitors (Class 2) on number 8, 12, 13, 14 and 15, leave capacitor at 150 —10, 0°C
for 1 hour and measure the value after leaving capacitor for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
Q (Class 1)
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
200 min.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max
X7T: 200% of initial spec. max
500MΩ or 25MΩ•μF min.
whichever smaller.
No mechanical damage.
350 min.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max
X7T: 200% of initial spec. max
1,000MΩ or 50MΩ•μF min.
whichever smaller.
Characteristics
Class 1
Class 2
Characteristics
Class 1
Class 2
C0G
C0G
X7R
X7S
X7R
X7S
X7T
X7T
Change from the
value before test
±7.5 %
± 12.5 %
Change from the
value before test
±3 %
± 15 %
C Series — Mid Voltage Application
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitors under testing temperature
and voltage for 1 hour.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply voltage at 125±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.