NT2S-CN222-V1 Omron, NT2S-CN222-V1 Datasheet - Page 43

• Manufacturer Part Number: NT2S-CN222-V1
• Description: LCD Touch Panels 9 PIN TO PERIPH PORT CABLE 2M
• Manufacturer: Omron

Specifications of NT2S-CN222-V1

• Cable Length: 2m
• Connector Type B: PLC Peripheral
• Connector Type A: 9-Pin DIN
• Cable Assembly Type: DIN / Mini-DIN
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3.3.2
Unit can communicate with any PLC without any change in hardware. To communicate with PLC unit
needs proper communication driver. Each PLC has a defined protocol for communicating with any
device. PLC driver is downloaded in to unit along with the firmware. This driver enables the unit to talk to
a specific PLC.
Unit can be configured in following ways:
1.
2.
3.
Either of the ports can be configured for the ways mentioned above. Depending on the type of communi-
cation, user may require to define certain parameters.
The following table displays number of nodes connected on Com1 and Com2 with their Node address,
node name, node type (unit / PLC), total number of blocks used in application.
Note: Default Node address for unit is 0 for COM1 and COM2. This address needs to be changed if
settings for PLC address is same as unit address.
For IBM Communication
For Serial Printing
For PLC Communication
Setting Network Configuration For NT3S Series Products
Before you Begin
37