HT-150UY-5308 Harvatek, HT-150UY-5308 Datasheet - Page 23

• Manufacturer Part Number: HT-150UY-5308
• Description: Standard LED - SMD Yellow, 591nm 150mcd, 20mA
• Manufacturer: Harvatek

Specifications of HT-150UY-5308

• Led Size: 3.2 mm x 1.6 mm
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Precautions
1.
2.
3.
4.
5.
6.
Reworking
Cleaning
Following are cleaning procedures after soldering:
Cautions of Pick and Place
Official Product
Tentative Product
Specifications are subject to change without notice. Data and
drawings herein are copyrighted.
 Rework should be completed within 5 seconds under 260
 The iron tip must not come in contact with the copper foil.
 Twin-head type is preferred.
 An alcohol-based solvent such as isopropyl alcohol (IPA) is recommended.
 Temperature x Time should be 50
 Ultra sonic cleaning: < 15W/ bath; bath volume ≤ 1liter
 Curing: 100
 Avoid stress on the resin at elevated temperature.
 Avoid rubbing or scraping the resin by any object.
 Electro-static may cause damage to the component. Please ensure that the equipment
Avoid exposure to moisture at all times during transportation or storage.
Anti-Static precaution must be taken when handling GaN, InGaN, and AlInGaP products.
It is suggested to connect the unit with a current limiting resistor of the proper size. Avoid
applying a reverse voltage beyond the specified limit.
Avoid operation beyond the limits as specified by the absolute maximum ratings.
Avoid direct contact with the surface through which the LED emits light.
If possible, assemble the unit in a clean room or dust-free environment.
is properly grounded. Use of an ionizer fan is recommended.
O
C max, <3min
Product: HT-150 Series
****************
o
C x 30sec. or <30
Oct. 19, 2005
o
C x 3min
O
Version of 1.2
C.
Top-emitting 1206 (3216)
HT-150 Series
Data Sheet No.
HT-150 Series
Page
23/25