D-150-0214 Tyco Electronics, D-150-0214 Datasheet - Page 2

• Manufacturer Part Number: D-150-0214
• Description: CONN SPLICE BUTT 12-16AWG BLACK
• Manufacturer: Tyco Electronics
• Series: SolderShield™r

Specifications of D-150-0214

• Terminal Type: Butt Splice, Inline, Individual Openings
• Number Of Wire Entries: 2
• Termination: Crimp
• Wire Gauge: 12-16 AWG
• Insulation: Fully Insulated
• Features: Heat Shrink
• Color: Black
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 5-1197449-9

INSTALLATION PROCEDURE:
1. Prepare cable as shown in the diagram. Tolerance on all dimensions is ± 0.76 (0.030).
2. Place items 1, 2, 4 and 3 onto one of the cables in sequence listed.
3. Crimp conductors into opposite ends of the crimp splice using a calibrated Raychem AD-1377.
4. Place the Filler Sleeve (shortest sleeve) over crimp and heat, using a Raychem approved hot air heater and reflector, until
5. Center the Insulator over the splice and recover it onto cable.
6. Position the Shield Splice so that an equal amount of cable braid is exposed between the sleeve shield and the cable jacket.
7. Start in center of sleeve and heat until the solder melts and the sleeve recovers. Move assembly through the heat slowly
8. Center the Sealing Sleeve over assembly and heat to recover the sleeve and melt the adhesive. Start in center and work toward
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
If this document is printed it becomes uncontrolled. Check for the latest revision.
sleeve recovers onto crimp.
enough to keep the solder melting and the sleeve recovers. Heat overlap portion of shields 5 to 10 extra seconds to ensure
adequate heat transfer to cable shield. Then move back to center and heat toward other end of sleeve.
ends.
M. FORONDA
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics Corporation
305 Constitutional Drive
Menlo Park, CA 94025 USA
REPLACES:
N/A
SPECIFICATION CONTROL DRAWING
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
RAYCHEM
D010126
Products
TITLE :
DOCUMENT NO.:
DATE:
PROD. REV.
A
May 29, 2001
SPLICE KIT, COAXIAL CABLE,
SCALE:
D-150-0214
None
SIZE:
A
DOC ISSUE:
1
SHEET:
2 of 2