W33180 Seoul Semiconductor Inc, W33180 Datasheet - Page 14

• Manufacturer Part Number: W33180
• Description: LED High Power (> 0.5 Watts) Pure White 6500K 1 Watt
• Manufacturer: Seoul Semiconductor Inc

Specifications of W33180

• Illumination Color: Pure White
• Wavelength/color Temperature: 6500 K
• Luminous Flux: 32 lm
• Power Rating: 1 W
• Operating Voltage: 3.5 V
• Operating Current: 350 mA
• Minimum Operating Temperature: - 30 C
• Maximum Operating Temperature: + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Precaution for use
• Storage
• Attention after opened
• In case of more than 1 week passed after opening or change color of indicator on
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
• Quick cooling shall avoid.
• Components shall not be mounted on warped direction of PCB.
• Anti radioactive ray design is not considered for the products listed here in.
• Gallium arsenide is used in some of the products listed in this publication. These products are
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
• When the LEDs are illuminating, operating current should be decided after considering the
• LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or
• The LEDs must be soldered within seven days after opening the moisture-proof packing.
• Repack unused products with anti-moisture packing, fold to close any opening and then store in
• The appearance and specifications of the product may be modified for improvement without
• Long time exposure of sunlight or UV occasions discolorment of package
In order to avoid the absorption of moisture, it is recommended to store in the dry box (or
desiccator) with a desiccant . Otherwise, to store them in the following environment is
recommended. Temperature : 5 ~30
However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect
the light transmission efficiency, causing the light intensity to drop. Attention in followed.
desiccant components shall be dried 10-12hr. at 60±5℃.
process to normal temp. after soldering.
dangerous if they are burned or smashed in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed.
When washing is required, IPA should be used.
package maximum temperature.
more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be
used for storage.
a dry place.
notice.
a. After opened and mounted, the soldering shall be quickly.
b. Keeping of a fraction
Temperature : 5 ~ 40℃ Humidity : less than 50%
SEOUL SEMICONDUCTOR CO., LTD.
Humidity : 60%HR max.
www.zpowerled.com
Rev 01 – 2007 / 02