E3F2-LS10B4 Omron, E3F2-LS10B4 Datasheet - Page 3

• Manufacturer Part Number: E3F2-LS10B4
• Description: Photoelectric Sensors - Industrial 100M PNP DC PREWIRED PLASTIC
• Manufacturer: Omron
• Type: Photoelectric Sensorr
• Series: E3F2r

Specifications of E3F2-LS10B4

• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 25 C
• Operating Supply Voltage: 10 V to 30 V
• Sensing Distance: 100 mm
• Output Configuration: PNP
• Sensing Method: Reflective, Background Suppression
• Sensing Object: White Paper
• Sensing Light: Red
• Mounting Type: M18 Threaded Body, Nut
• Current - Supply: 30mA
• Voltage - Supply: 10 V ~ 30 V
• Package / Case: Axial, Pre-Wired
• Features: Optical Proximity Switch
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications
Ratings
*1.
*2.
E3F2-SUS
Item
Sensing method
Power supply voltage
Current consumption
Sensing distance
Standard object
Directional angle
Differential travel
(hysteresis)
Black/white error
Response time
Control output
Power reset time
Ambient illumination
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Light source (wave length)
Indicators
Sensitivity adjustment
Connection method
Operation mode
Weight
(approx.)
Circuit protection
Material
The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16l/min water at 80°C is sprayed onto the
sensor from different angles with 8000-10000kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality.
Material-specification for stainless steel housing case: 1.4305 (W.-No.), 303 (AISI), 2346 (SS). For other stainless steel materials please contact your OMRON
sales representative.
Pre-wired (2 m)
Connector
Lens
Housing
*1
E3F2-7
Through-beam
10 to 30 V DC
50 mA max.
7 m
Opaque:
11 mm dia. min.
3° to 20°
–
–
Operation and Re-
set:
2.5 ms max.
Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.)
50 ms
Incandescent lamp:3000 lx max. / Sunlight:10000 lx max.
Operating: -25 to 55 °C / Storage: -30 to 70 °C (with no icing or condensation)
Operating: 35% to 85% / Storage: 35% to 95% (with no condensation)
20 MΩ min. at 500 V DC between energized parts and case
1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case
10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z)
Destruction: 500 m/s
IEC 60529 IP67, IP69K after DIN 40050-9
Infrared LED
(950 nm)
Light
incident / power in-
dicator for light
source (red)
Fixed
2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12)) or M12-connector
Light-ON or Dark-ON selectable by wiring
180 g
120 g
Output short-circuit and power supply reverse polarity
PMMA
Stainless steel
#
*2
2
E3F2-R4
Retro-reflective
30 mA max.
0.1 to 4 m
(with E39-R1S)
Opaque:
56 mm dia. min.
3° to 20°
1 ms max
100 ms max.
Red LED (660 nm) Infrared LED (880 nm)
Light incident (red) /
stability (green)
Adjustable
90 g
50 g
each direction (X, Y, Z)
#
-
#
E3F2-DS10
Diffuse-reflective
Wide beam (fixed)
0.1 m
(5 x 5 cm white
mat paper)
–
–
20% max.
2.5 ms max.
50 ms
Light incident / power indicator for light
source (red)
Fixed
25 mA max.
#
E3F2-DS30
Potentiometer
adjustment
30 mA max.
0.3 m
(10 x 10 cm white
mat paper)
Adjustable
#
E3F2-LS10
Background
suppression
0.1 m
(10 x 10 cm white
mat paper)
5% max
3% max
1 ms max.
100 ms
Red LED (660 nm)
Output
indicator
(orange) / stability
(green)
Fixed
#
4-
#
3