PS9552-AX CEL, PS9552-AX Datasheet - Page 18

• Manufacturer Part Number: PS9552-AX
• Description: High Speed Optocouplers 2.5A IGBT Gate Drive
• Manufacturer: CEL

Specifications of PS9552-AX

• Input Type: DC
• Isolation Voltage: 5000 Vrms
• Maximum Continuous Output Current: 2.5 A
• Maximum Fall Time: 0.1 us
• Maximum Forward Diode Current: 25 mA
• Maximum Rise Time: 0.1 us
• Minimum Forward Diode Voltage: 1.3 V
• Output Device: Integrated Photo IC
• Configuration: 2 Channel
• Maximum Baud Rate: 1 MBps
• Maximum Forward Diode Voltage: 2.1 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Input Diode Current: 25 mA
• Maximum Power Dissipation: 250 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Package / Case: DIP-8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
(2) Wave soldering
(3) Soldering by Soldering Iron
18
• Peak reflow temperature
• Time of peak reflow temperature
• Time of temperature higher than 220 C
• Time to preheat temperature from 120 to 180 C
• Number of reflows
• Flux
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
• Peak Temperature (lead part temperature)
• Time (each pins)
• Flux
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(b) Please be sure that the temperature of the package would not be heated over 100 C
260 C or below (molten solder temperature)
10 seconds or less
120 C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
Data Sheet PN10589EJ07V0DS
350 C or below
3 seconds or less
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
PS9552,PS9552L1,PS9552L2,PS9552L3
260 C or below (package surface temperature)
10 seconds or less
60 seconds or less
120 30 s
Three
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)