ST3215SB32768H5HPWAA AVX Corporation, ST3215SB32768H5HPWAA Datasheet - Page 5

• Manufacturer Part Number: ST3215SB32768H5HPWAA
• Description: CRYSTAL 32.768KHZ 12.5PF SMD
• Manufacturer: AVX Corporation
• Series: ST3215SB, Kyocerar
• Type: Tuning Forkr

Specifications of ST3215SB32768H5HPWAA

• Frequency: 32.768kHz
• Frequency Stability: ±200ppm
• Load Capacitance: 12.5pF
• Package / Case: 2-SMD, No Lead (DFN, LCC)
• Frequency Tolerance: ±20ppm
• Operating Mode: Fundamental
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Size / Dimension: 0.126" L x 0.060" W (3.20mm x 1.50mm)
• Height: 0.031" (0.80mm)
• Tolerance: 20 PPM
• Termination Style: SMD/SMT
• Operating Temperature Range: - 40 C to + 85 C
• Dimensions: 1.5 mm W x 3.2 mm L x 0.8 mm H
• Capacitance, Load: 12.5 pF
• Capacitance, Shunt: 0.9 μF
• Drive Level: 0.1 μW
• Esr, Maximum: 70 Kilohms
• Package Type: Ceramic
• Series Code: ST3215SB
• Temperature, Operating: –40 to +85 °C
• Temperature, Operating, Range: -40 to +85 °C
• Crystal Mounting Type: SMD
• No. Of Pins: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 478-5428-2

Tape strength
7. TAPING
7.1 TAPING
Feeding direction
END
1.Material of the carrier tape shall be polystyrene or A-PET (ESD).
2. Material of the seal tape shall be polyester (ESD).
3. The seal tape shall not cover the sprocket holes and not protrude from the carrier tape.
4. The R of the corner without designation is 0.2R MAX.
5. Misalignment between centers of the cavity and a sprocket hole shall be 0.05mm or less.
6. Cumulative pitch tolerance of “G” shall be ±0.2mm at 10 pitches.
7. The directivity of printing in an embossing tape shall be unified as shown in the
8. Peeling force of the seal tape is in the range of 0.1 to 0.7N.
Maximum quantity per 1 reel is Max 10,000pcs(ø330 Reel) and oriented part in 1 direction
above-mentioned figure.
165 to 180˚
Empty compartment
300mm min.
Ending
Cover tape
KYOCERA KINSEKI CORPORATION
Enboss tape
Direction (View from cover tape)
SMD parts taped area
Leader and ending tape
No.
Tape strength
EQM08-5GC-T030881-00
Feeding direction
Empty compartment
100mm min. sealed
with top cover tape
350mm min.
Leader
Bending radius (50mm)
Top cover tape only
Date:2008/12/08
START
5(8)