87106-233 AVX Corporation, 87106-233 Datasheet - Page 14

• Manufacturer Part Number: 87106-233
• Manufacturer: AVX Corporation

Specifications of 87106-233

• Tolerance (+ Or -): 10%
• Voltage: 500VDC
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Through Hole
• Construction: Stacked
• Case Style: Ceramic Chip
• Wire Form: Not Required
• Product Length (mm): 26.7mm
• Product Depth (mm): 12.7mm
• Product Height (mm): 6.1mm
• Product Diameter (mm): Not Requiredmm
• Capacitance: 2.2uF
• Package / Case: 3 Stacked
• Lead Free Status / RoHS Status: Not Compliant

SMPS Stacked MLC Capacitors
(SM Style) DSCC #87106 and #88011
1/ Post checks are required (see paragraph 3.9 of MIL-PRF-49470).
2/ Marking defects are based on visual examination only. Any subsequent electrical defects shall not
1/ Unless otherwise specified herein, when necessary, mounting of group B samples shall be at the
2/ A sample unit having one or more defects shall be charged as a single defective.
3/ Order of tests is at discretion of manufacturer.
4/ See 3.2.3 of DSCC 87106.
5/ Sample size shall be 3 pieces with zero defectives permitted.
6/ Total of one defect allowed for combination of subgroup 1, subgroup 2, and subgroup 3 inspections.
Subgroup 1
Thermal shock and voltage conditioning 1/
Subgroup 2
Visual and mechanical examination:
Interface requirements
Marking 2/
Workmanship
Subgroup 1 3/
Temperature coefficient
Resistance to solvents 5/ 6/
Immersion
Terminal strength 5/
Subgroup 2
Resistance to soldering heat
Moisture resistance
Subgroup 3
Marking legibility
(laser marking only)
Subgroup 4
Solderability
Subgroup 5
Life
be used as a basis for determining marking defects.
discretion of the manufacturer.
Material
Physical dimensions
(other than physical dimensions)
Inspection
Inspection
MIL-PRF-49470
paragraph of
Requirement
3.28.1
Table III. Group B inspection. 1/
3.23
3.18
3.24
3.20
3.21
3.15
3.26
Table II. Group A inspection.
4/
MIL-PRF-49470
paragraph of
Requirement
3.5 and 3.5.1
3.28
3.30
3.9
3.4
3.1
MIL-PRF-49470
paragraph of
Test method
4.8.4.1
4.8.20
4.8.15
4.8.10
4.8.17
4.8.18
4.8.12
4.8.22
4/
MIL-PRF-49470
paragraph of
Test method
4.8.5
4.8.4
to be inspected
sample units
Number of
per case code
5 minimum
12
12
6
3
Sampling procedure
100% inspection
13 samples
1
1
1
permitted 2/
0 failures
Number of
defectives
0
0
6/ 1
21