07C1003JP Vishay, 07C1003JP Datasheet - Page 4

• Manufacturer Part Number: 07C1003JP
• Description: NTC Thermistor
• Manufacturer: Vishay
• Type: NTCr
• Series: Cr

Specifications of 07C1003JP

• Mounting Style: Through Hole
• Pin Count: 2
• Resistance @ 25c: 100kohm
• Percentage Of Resistance Tolerance @ 25c: ±5
• Product Length (mm): Not Requiredmm
• Product Depth (mm): Not Requiredmm
• Thermistor Type: NTC
• Resistance: 100kohm
• Thermistor Tolerance: ± 5%
• Thermistor Case Style: Radial Lead
• No. Of Pins: 2
• Peak Reflow Compatible (260 C): No
• Terminal Type: PCB Thru Hole
• R/t Curve: 7
• Tolerance: 5 %
• Termination Style: Radial
• Operating Temperature Range: - 50 C to + 150 C
• Mounting Type: Through Hole
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Not Compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Not Compliant

POINT MATCH TOLERANCE
The standard leaded thermistors are calibrated and tested at 25 °C to a tolerance of ± 5 % or ± 10 %; however, tighter tolerance,
point matched thermistors are readily available as are special point match temperatures to fit your application.
Since these thermistors have only one controlled point of reference (the point match temperature), the resistance at other
temperatures is given by the “Resistance vs. Temperature Conversion Tables” for the appropriate material curve. The resistance
value at any temperature is the ratio factor times the resistance at 25 °C. The resistance vs. temperature conversion tables can
be found at:
Example: 09M1002JF, + 70 °C resistance = (Resistance factor for curve 9 at 70 °C is 0.1990) x (10 000 Ω resistance at 25 °C)
= 1990 Ω.
The tolerance of the resistance at any temperature is described by figure 2.
FIGURE 2
POINT MATCH TOLERANCES VS. TEMPERATURE
COMPUTER AIDS FOR THERMISTOR SELECTION
A spreadsheet is available for the Vishay thermistor materials that calculates beta, Steinhart-Hart equation constants A, B, and
C, the resistance at any temperature based upon the Steinhart constants or beta, the temperature equivalent of the resistance
reading, and resistance temperature coefficients.
This spread sheet will also calculate the total resistance tolerance of any point matched thermistor for temperatures in 10 ºC
increments, and the resistance tolerance at any temperature within the calibrated range of curve tracking thermistors. Please
contact factory if interested in this Excel™ spreadsheet at [e-mail].
Document Number: 33003
Revision: 12-Nov-09
www.vishay.com/doc?33004
MAX. R vs. T
MIN. R vs. T
NOMINAL R vs. T
25 °C
TEMPERATURE
(CALIBRATION TEMPERATURE)
NTC Thermistors, Radial Leaded and Coated
For technical questions, contact:
PIVOT POINT
and www.vishay.com/doc?33011.
Point match resistance tolerances at temperatures other
than 25 ºC are not the same as the calibration temperature.
This difference is presented in figure 2.
The tolerance at any given temperature is the point match
tolerance + the MT ± % (manufacturing tolerance).
The MT ± % may be obtained from the R vs. T conversion
tables (see www.vishay.com/doc?33004) and is added to the
point match temperature, i.e., ± 1 % Tol. at 25 ºC + ± 2.6 %
at - 30 ºC for Curve 1 equals a total tolerance of ± 3.6 % at
- 30 ºC.
[e-mail]
Vishay Dale
www.vishay.com
M, C, T
107