DO NOT BUY TE Connectivity, DO NOT BUY Datasheet - Page 6

• Manufacturer Part Number: DO NOT BUY
• Manufacturer: TE Connectivity
• Type: Guide Pinr

Specifications of DO NOT BUY

• Product Length (mm): 21.08mm
• Product Depth (mm): 6.35mm
• Lead Free Status / RoHS Status: Not Compliant

6
Dimensions are shown for reference
purposes only.
Recognized under the
Component Program of
Underwriters Laboratories
Inc. for 250 volts,
File No. E28476
Certified by Canadian
Standards Association,
File No. LR 7189
Material Specifications
C o n t a c t s
The material composition
and construction of AMP
contacts encompass varying
price ranges and perfor-
mance characteristics.
Specific materials and avail-
able platings and plating
thicknesses of each contact
type are provided on individ-
ual contact pages in the
Contact section (pages 30
thru 43). A brief description
of each contact type is pre-
sented on pages 26 through
29. Also, typical perfor-
mance data of M Series
connectors and contacts is
shown below.
H o u s i n g s
M Series connector housings
are made of either diallyl
phthalate (blue), general
purpose phenolic (black)
or polyester (black).
Diallyl phthalate housings
are molded of material per
MIL-M-14, Type SDG. These
housings are ideally suited
for use where adverse envi-
ronmental conditions are an
important factor. Their
advantages include excep-
tional stability; excellent
resistance to acids, alkalies
and solvents; low moisture
absorption; and good
dielectric strength.
M Series
Pin and Socket Connectors
Dimensions are in inches and mil-
limeters unless otherwise specified.
Values in brackets are metric equiva-
lents.
Phenolic housings are
molded of material per
MIL-M-14, Type CFG. The
performance characteristics
of these housings make
them an excellent choice
for applications in which
exceptional resistance to
acids, alkalies or solvents
is not of prime concern.
Polyester housings are
molded from a high temper-
ature thermoplastic material
per ASTM D3220. Polyester
housings provide the high
temperature characteristics
of diallyl phthalate and phe-
nolic, but with a higher
impact strength.
H a r d w a r e
A variety of materials such
as plated steel, stainless
steel and aluminum, are
used in the construction of
M Series connector hard-
ware. This provides for the
proper operation and dura-
bility of each hardware
component, while offering a
choice of economies to sat-
isfy particular application
requirements. The materials
of each hardware compo-
nent are specified on the
individual hardware compo-
nent pages in the Hardware
section (pages 78 through
89).
Specifications subject to change.
Performance Data
Temperature Rating:
Phenolic Housings,
–55°C to +150°C
Diallyl Phthalate Housings,
–65°C to +125°C
Polyester, –55°C to +130°C
Flammability Ratings: UL94V-0
Dielectric Withstanding
Voltage (at sea level):
Type II Contacts, 1500 VAC, RMS
Type III+ Contacts, 900 VAC, RMS
Durability (Mating/Unmating):
Types II and III+ Contacts,
Gold Plated: 500 cycles;
Types II and III+ Contacts,
Bright Tin-Lead Plated:
50 cycles; Type I Contacts,
Gold Plated: 100 cycles
Note: For detailed information on the
above performance data and further infor-
mation on other performance data such
as Insulation Resistance, Thermal Shock,
Moisture Resistance, Vibration and
Physical Shock, request AMPProduct
Specification No. 108-10001.
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Catalog 82003
Revised 3-01